12 GB
3)
When they are not being used,
store rechargeable battery units
away from paperclips, coins, keys,
nails, screws or other small metal
objects that could cause the contacts
to be bridged.
Short-circuiting the
contacts of a rechargeable battery unit may
result in heat damage or fire .
4)
Fluids may leak out of rechargeable
battery units if they are misused.
If this happens, avoid contact with
the fluid. If contact occurs, flush
the affected area with water. Seek
additional medical help if any of the
fluid gets into your eyes.
Escaping
battery fluid may cause skin irritation or
burns .
5)
Protect the rechargeable battery
from heat; for example, from
continuous exposure to sunlight,
fire, water and moisture. There is a
risk of explosion.
Service
1)
Have your power tool serviced by
a qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool is
maintained .
Grinder safety warnings
m
WARNING!
u
Dust from materials such as lead paint,
some types of wood, and metal can be
harmful to your health .
u
Contact with or inhaling this type of
dust can present a danger to the user or
persons nearby .
m
WARNING!
Wear safety glasses and a dust mask!
Safety instructions for all
applications
General safety instructions for
grinding, sandpaper sanding, working
with wire brushes, polishing, milling
and abrasive cutting
1)
This power tool is intended for use
as a grinder, sandpaper sander,
wire brush, polisher, milling
machine and abrasive cutting
machine. Please follow all safety
instructions, instructions, diagrams
and data that you receive with
the appliance.
If you do not observe
the following instructions, this can lead to
electrical shock, fire and/or serious injuries .
2)
Do not use any accessories that
have not been provided or
recommended by the manufacturer
for this power tool.
Just because you
can attach the accessories to your power
tool, does not ensure they are safe to use .
3)
The permissible speed of the
accessory tool used must be at
least as high as the maximum
speed specified for the power tool.
Accessories that rotate faster than the
permissible rate can break and throw pieces
into the air .
4)
The external diameter and
thickness of the accessory tool used
must comply with the dimensions
of your power tool.
Incorrectly
dimensioned accessory tools cannot be
sufficiently shielded or controlled .
Summary of Contents for 373102 2104
