Parkside 384506 2107 Original Instructions Manual Download

Page: 9 / 197

PWS 230 D4

│

■

5. Service

Have your power tool serviced by a qualiﬁed
repair person using only identical replace-
ment parts.

This will ensure that the safety of

the power tool is maintained.

Always arrange for the replacement of the
plug or the power cord to be carried out by
the manufacturer of the appliance or by his
approved customer services.

This will ensure

that the safety of the power tool is maintained.

Safety instructions for all
applications

Special safety instructions for grinding and
abrasive cutting

This power tool is to be used as a grinder and
abrasive cutting appliance. Please follow all
safety instructions, instructions, diagrams and
data that you receive with the appliance.

you do not observe the following instructions,
this can lead to an electrical shock, ﬁre and/or
serious injuries.

This power tool is not suitable for sandpaper
sanding, working with a steel brush or
burnishing.

Using the power tool for applica-

tions for which it is not designed can lead to
hazards and injuries.

Do not use any accessories that have not
been speciﬁcally provided or recommended
by the manufacturer for this power tool.

Just

because you can attach the accessories to your
power tool does not guarantee they are safe to
use.

The maximum speed of the accessory tool
used must be at least as high as the maximum
speed speciﬁed for the power tool.

Accesso-

ries that rotate faster than the permissible rate
can break and throw pieces into the air.

The external diameter and thickness of the
accessory tool used must comply with the
dimensions of the power tool.

Incorrectly

dimensioned accessory tools cannot be suﬃ-
ciently shielded or controlled.

Attachment tools with a thread insert must
match the thread of the grinding spindle
exactly. For attachment tools that are
mounted using a ﬂange, the diameter of the
hole on the attachment tool must correspond
to the width of the ﬁtment on the ﬂange.

Accessory tools that do not exactly ﬁt on the
grinding spindle rotate unevenly, vibrate
severely and can lead to a loss of control.

Never use damaged accessory tools. Check
accessory tools such as grinding discs before
each use for chips or cracks, grinding plates
for cracks, wearing or excessive wear and
tear and wire brushes for loose or broken
wires. If the power tool or the accessory tool
in use is dropped, check to see if it is
damaged or use an undamaged accessory
tool. When you have checked and inserted
the accessory tool, ensure that you and any
other persons in the vicinity remain outside of
the level of the rotating accessory tool and
allow the tool to rotate at maximum speed for
one minute.

Damaged accessories usually

break during the test period.

Wear personal protective equipment.
Depending on the application, ensure that
you use full face protection, eye protection or
goggles. Use a dust mask, hearing protec-
tion, protective gloves or special apron that
protect you from grindings and material parti-
cles as required.

Protected your eyes from

ﬂying debris that may be created during certain
applications. Dust or ﬁlter masks must be used
to ﬁlter any dust created by the application. If
you are exposed to loud noise for any length of
time, you may suﬀer hearing loss.

Ensure that other people remain at a safe
distance to your workspace. Anyone who
enters the workspace must wear personal
protective equipment.

Fragments of the work-

piece or broken accessory tools can ﬂy oﬀ and
cause injury – even outside the immediate
working area.