Parkside 385679 2107, Translation Of The Original Instructions

PHP 500 E3

■ 

2 

│

GB

│

IE

│

NI

HOT GLUE GUN PHP 500 E3
Introduction

Congratulations on the purchase of your new 
appliance . You have selected a high-quality 
product . The operating instructions are part of this 
product . They contain important information about 
safety, usage and disposal . Before using the 
product, please familiarise yourself with all oper-
ating and safety instructions . Use the product only 
as described and for the range of applications 
specified . Please also pass these operating instruc-
tions on to any future owner .

Intended use

This appliance is intended for gluing wood, card-
board, packaging, PVC, carpet, seals, plastics, 
leather, ceramics, glass and fabric with hot-melt 
adhesive . The material to be glued must be clean, 
dry and free of grease . Any other usage of or 
modification to the appliance is deemed to be 
improper and carries a significant risk of accidents . 
The manufacturer accepts no responsibility for 
damage(s) attributable to misuse . The appliance is 
not intended for commercial use .

Features

1

 Feeder shaft

2

 Control lamp for the mains connection

3

 Mains connection table station

4

 Table station with appliance cradle

5

 Trigger

6

 Plastic stand

7

 Drip tray

8

 Nozzle

9

 Thermal protection for nozzle

0

 Mains connection glue gun

q

 Power cable

Package contents

1 hot glue gun
1 table station with appliance cradle
1 mains cable
1 plastic stand
3 glue sticks
1 carrying case
1 set of operating instructions

Technical details

Rated voltage 

 230V ∼, 50 Hz 
(alternating current)

Rated power consumption   25 W (starting at 

500 W)

Heating time 

 approx . 2 min .

Protection  class 

 II  /   (double shielded)

This mark confirms that the product 
complies with the product safety 
requirements applicable in the UK .