Parkside 390384 2201, Translation Of The Original Instructions

PPS 200 C2

■ 

6 

│

GB

│

IE

│

NI

│

CY

Operation

Switching on and off

Switching on

♦

Press the ON/OFF switch 

0

 to position "I" .

Switching off

♦

Press the ON/OFF switch 

0

 to position "0" .

Fitting the sanding sheet

WARNING!

►

Always remove the plug from the mains 
power socket before carrying out any work 
on the appliance .

NOTE

►

Before fitting a new sanding sheet 

7

, remove 

any dust and dirt from the sanding plate 

6

, 

8

 and 

9

 .

►

Ensure that the extraction holes on the sanding 
sheet match up with those on the sander plate .

♦

Position the sanding sheet 

7

 flush on one side 

of the sanding pad 

6

, 

8

 and 

9

 .

♦

Then place the sanding sheet 

7

 on the sanding 

pad 

6

, 

8

 and 

9

 and press it firmly into 

place .

Different materials require different grain sizes .  
You can find out which grain is suitable for which 
work in our non-binding recommendations in 
"Work instructions, tips and tricks" .

Extracting dust

Wear a dust mask!

WARNING! RISK OF FIRE!

►

When working with power tools that are fitted 
with a dust collector 

3

 or can be connected 

to a vacuum cleaner via the vacuum cleaner 
adapter, there is a risk of fire! In unfavourable 
conditions, e .g . when sparks are flying while 
sanding metal or metal residues in wood, 
wood dust in the dust sack (or in the vacuum 
cleaner dust bag) can spontaneously ignite . 
This is a particular risk if the wood dust  is 
mixed with paint residues or other chemicals 
and the workpiece has become hot after 
being worked for a long time . Therefore, do 
not allow the workpiece to overheat and 
always empty the dust collector 

3

 or the 

dust bag in the vacuum cleaner before taking 
a break from work .

Dust extraction with dust collector
Attaching the dust collector

♦ 

Push the dust collector 

3

 onto the appliance . 

Make sure that the   symbol on the dust 
collector 

3 

is aligned with the ▸ symbol on the 

appliance . Turn the dust collector 

3

 to the

symbol to lock it in place (see detailed illustra-
tion on upper part of the fold-out page) .

Removing the dust collector

♦

Turn the   symbol on the dust collector 

3

 to 

the ▸ symbol on the appliance (see detailed 
illustration on upper part of the fold-out page) . 
Pull the dust collector 

3

 off the appliance .

NOTE

►

To ensure optimum extraction, regularly empty 
and shake out the dust collector 

3

 . To do so, 

press the release button 

2

 to pull the rear 

part of the dust collector 

3

 off the appliance . 

Now remove the dust bag 

3a

 . Clean the dust 

bag 

3a

  thoroughly by tapping it out .

►

Perforated sanding sheets are required for 
dust extraction .