PAMS 12 A1
GB
│
CY
│
7
■
Before use
Removing/charging/
inserting the battery pack
CAUTION!
►
Always disconnect the mains plug before
removing the battery pack
2
from or insert-
ing it into the charger.
NOTE
►
The battery is supplied partially charged.
Ideally, charge the battery completely before
use. You can charge the lithium-ion battery at
any time without shortening its service life.
Interrupting the charging process does not
damage the battery.
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level
is between 50% and 80%. The storage climate
should be cool and dry, and the ambient tem-
perature should be between 0°C and 50°C.
1. To remove the battery pack
2
, press the release
buttons
1
and pull the battery pack
2
out of
the appliance.
2. Insert the battery pack
2
into the high-speed
charger
e
.
3. Insert the power plug into the socket. The control
LED
q
lights up red.
4. The green charge level indicator LED
w
indi-
cates that the charging process is complete and
the battery pack
2
is ready for use.
5. Push the battery pack
2
back into the appli-
ance.
Checking the battery charge level
♦
Press the ON/OFF switch
6
to check the
charge level of the battery (see also main dia-
gram). The status/remaining charge is shown
on the battery display LED
7
as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Using the appliance
NOTE
►
Always switch the sander on before applying
it to the workpiece.
Switching on the appliance
♦
Press the ON/OFF switch
6
.
Switching off the appliance
♦
Press the ON/OFF switch
6
.
Connecting a dust extraction unit
WARNING! RISK OF FIRE!
►
There is a risk of fire when working with
power tools that are fitted with a dust collec-
tion box or can be connected to a vacuum
cleaner via the vacuum cleaner adapter! In
unfavourable conditions, e.g. when sparks
are flying while sanding metal or metal resi-
dues in wood, wood dust in the dust sack (or
in the vacuum cleaner dust bag) can sponta-
neously ignite. This is a particular risk if the
wood dust is mixed with paint residues or
other chemicals and the workpiece has
become hot after being worked for a long
time. Therefore, do not allow the workpiece
and appliance to overheat and always empty
the dust box or the dust bag in the vacuum
cleaner before taking a break from work.
Wear a dust mask!
WARNING!
►
Always disconnect the battery pack
2
before carrying out any work on the appli-
ance.
Connecting
♦
Remove the protective cover
3
from the adapter
connection
8
.
♦
Plug the adapter
4
into the adapter connec-
tion
8
.
♦
Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the adapter
4
.
Summary of Contents for 405828 2201
