39
GB/MT
Start-up / Maintenance and Cleaning
Maintenance and Cleaning / Service / Warranty / Disposal
Always keep the device clean, dry and free of
oil or grease.
Do not allow liquids to enter the hammer drill.
Use a dry cloth to clean the housing.
Regularly clean the tool holder
8
.
CAUTION! PRETENSION!
Pull the locking
sleeve
10
back and release the dust cap
9
.
Clean and grease components.
Service
Have your appliance
repaired by qualified professionals
using OEM parts only.
This will maintain
the safety of the device.
If the connection cable needs
to be replaced, this repair must be performed
by the manufacturer or a representative to pre-
vent safety hazards.
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
Service Great Britain
Tel.:
0871 5000 720
(0,10 GBP/Min.)
e-mail: kompernass@lidl.co.uk
IAN 46883
MT
Service Malta
Tel.: 80062230
e-mail: kompernass@lidl.com.mt
IAN 46883
Disposal
The packaging is made of environmen-
tally friendly materials, which may be
disposed through your local recycling
facilities.
Do not dispose of power tools
with household rubbish!
In accordance with European Directive 2002 / 96 / EC,
worn out power tools must be collected separately
and taken for environmentally compatible recycling.
Contact your local refuse disposal authority for
more details on the disposal of worn out electrical
devices.
