Parkside 93497, Operation And Safety Notes Translation Of Original Operation Manual

8  GB

General safety advice for electrical power tools

Additional safety … / Additional safety information for routers / Operation

b) 

 Wear personal protective equipment 
and always wear safety glasses.

The 

wearing of personal protective equipment such 
as dust masks, non-slip safety shoes, safety hel-
mets or ear protectors, appropriate to the type 
of electrical power tool used and work under-
taken, reduces the risk of injury.

c)  

Avoid unintentional operation of the 
device. Check that the electrical power 
tool is switched off before you connect 
it to the mains, pick it up or carry it.

Accidents can happen if you carry the device 
with your finger on the ON / OFF switch or 
with the device switched on.

d)  

Remove any setting tools or spanners 
before you switch on the device. 

A tool 

or spanner left attached to a rotating part of a 
device can lead to injury.

e)  

Avoid placing your body in an unnat-
ural position. Keep proper footing 
and balance at all times. 

By doing this, 

you will be in a better position to control the 
electrical power tool in unforeseen circumstances.

f)  

Wear suitable clothing. Do not wear 
loose clothing or jewellery. Keep your 
hair, clothing and gloves clear of mov-
ing parts. 

Loose clothing, jewellery or long 

hair can become trapped in moving parts.

g)  

If vacuum dust extraction and collec-
tion devices are fitted, do not forget 
to check that they are properly con-
nected and used correctly.

 The use of 

these devices reduces the hazard presented 
by dust.

4.   Careful handling and use of 

electrical power tools

a)  

Do not overload the device. Always 
use an electrical power tool that is  
intended for the task you are under-
taking. 

By using the right electrical power 

tool for the job, you will work more safely and 
achieve a better result.

b)  

Do not use an electrical power tool if 
its switch is defective. 

An electrical power  

tool that can no longer be switched on and off 
is dangerous and must be repaired.

c)  

Pull the mains plug from the socket 
before you make any adjustments to 
the device, change accessories or when 
the device is laid aside. 

This precaution is 

intended to prevent you from unintentionally 
starting the device.

d)  

Always ensure that electrical power 
tools are kept out of reach of children 
when not in use. Do not let anyone 
use the device if he or she is not famil-
iar with it or has not read the instruc-
tions and advice. 

Electrical power tools 

are dangerous when they are used by  
inexperienced people.

e)  

Maintain the device carefully. Check 
that moving parts are working prop-
erly and move freely. Check for any 
parts that are broken or damaged 
enough to detrimentally affect the 
functioning of the device. Have dam-
aged parts repaired before you use 
the device. 

Many accidents have their origins 

in poorly maintained electrical power tools.

f)  

Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp 
cutting edges are less likely to jam and are 
easier to control.

g)  

Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance 
with these instructions and advice, 
and the stipulations for this particular 
type of device. When doing this, take 
the working conditions into consider-
ation, as well as the task at hand. 

The 

use of electrical power tools for purposes other 
than those intended can lead to dangerous  
situations.

5. Service

a)  

Only have the equipment repaired by 
qualified specialist personnel using 
OEM spare parts. 

This ensures that the 

safety of the device is maintained.