PAHE 20-Li A1
■
44
│
GB
│
MT
WARNING!
►
The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. There is a risk of underestima-
tion of the vibration load if the power tool is
used regularly in this manner. Try to keep the
vibration loads as low as possible. Meas-
ures to reduce the vibration load are, e.g.
wearing gloves and limiting the working time.
In this case all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
Explanation of symbols on the appliance:
Read the operating instructions
and safety advice before initial
operation!
Wear protective gloves!
Wear safety shoes!
Wear ear protection!
Wear a hard hat!
Wear safety goggles!
Keep bystanders away from the
appliance!
Do not use chain saw one-handed!
Always use chain saw two-handed!
Beware of chain saw kickback
and avoid contact with bar tip!
Protect the appliance against
rain or moisture!
Keep at least 10 m away from
overhead lines and at least 15 m
to other people.
Caution! Falling objects.
Especially when cutting above
head height.
Beware of thrown objects!
Caution! Risk of injury due to
running blades.
Sound power level LWA data
in dB.
Turn the device off and remove
the battery pack before per-
forming any maintenance work!!
15 min
OIL
A full tank will last for approx.
15 minutes of continuous
operation.
Running direction of the chain!
Oil filler cap
MIN/MAX
Minimum/maximum level
indicator of the oil tank.
Tighten!
Release!
V
The arrow direction marks the
selected position.
Press in the direction of the
arrow.