Introduction
Belt sander PEBS 900
L
Introduction
L
For your safety
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. Further details can be found in the operating
instructions. In addition to the above, you must also
observe the general safety advice contained in the
accompanying booklet. Keep these instructions in a safe
place. If you pass the device on to anyone else, please
ensure that you also pass on all the documentation.
L
Proper use
The belt sander is intended for dry-sanding wood,
metal and paint. Always use a sanding belt and
grade of grit suitable for the particular surface you
are sanding. The speed selected should also be
appropriate for the material.
The device is not intended for commercial use.
Any other use or modification to the device shall
be considered as improper use and could give rise
to considerable dangers. The manufacturer will not
accept liability for loss or damage arising from
improper use.
L
Features and equipment
Q
Belt speed adjuster wheel
W
Locking knob
E
ON / OFF switch
R
Toothed belt cover
T
Dust extraction spout
Y
Belt adjuster screw
U
Auxiliary handle
I
Ventilation slots
O
Tensioning lever
P
Dust collection box
{
Extraction adapter
Fixed mounting kit
}
Mounting frame
q
Clamp plates 2x
w
Screw clamps 2x
e
Spacer plates 2x
r
Screw
L
Included items
Check that all the items and accessories are
present immediately after unpacking the device:
1 Belt sander PEBS 900
1 Sanding belt
1 Dust collection box
1 Extraction adapter
(for external vacuum dust extraction)
1 Fixed mounting kit
1 Operating instructions
1 Booklet containing general safety advice
1 Booklet “Guarantee and service”
L
Technical information
Belt sander:
Parkside PEBS 900
Nominal voltage:
230 V ~ 50 Hz
Nom. power input:
900 W
No-load belt speed:
180 - 340 m / min
No-load speed:
n
0
345 - 645 min
-1
Sanding belt
75 x 533 mm
Protection class:
II /
&
Weight:
3.8 kg
Noise / vibration information
Sound pressure level*: 87 dB (A)
Sound power level*:
Lw = 100 dB (pw)
Hand-arm vibration*:
< 2.5 m / s
2
Wear hearing protection!
* Values determined in accordance with EN 60 745
The PEBS 900 belt sander has full-wave electron-
ics with additional control electronics, soft start
with inrush current limiting.
6 GB/IE
