Parkside PAAP 12 A1, Original Instructions Manual

PAAP 12 A1

■ 

2 

│

GB

│

IE

│

NI

│

CY

CORDLESS POLISHER  

PAAP 12 A1
Introduction

Congratulations on the purchase of your new  
appliance . You have chosen a high-quality product . 
The operating instructions are part of this product . 
They contain important information about safety, 
usage and disposal . Before using the product, please 
familiarise yourself with all of the operating and 
safety instructions . Use the product only as described 
and for the range of applications specified . Please 
also pass these operating instructions on to any 
future owner .

Intended use

The appliance is designed for polishing or sanding 
lacquers, coatings, plastics and other smooth 
surfaces . Any other usage or modification of the 
appliance is deemed to be improper and carries 
a significant risk of accidents . The manu facturer 
accepts no responsibility for damage(s) resulting 
from improper usage . This appliance is intended 
for domestic use only .

Features

 Speed selector switch
 Battery LED (charge level indicator)
   Safety  lock-out
 Release button for the battery pack
 Battery pack
 ON/OFF switch
   Polishing  disc
 Thread
 Spindle lock

Fig. A

 Additional handle
 Polishing hood, orange
 Polishing hood, black
  Fake fur attachment
 Sandpaper

Fig. B

 Red charge control LED
 Green charge control LED
 High-speed charger

Package contents

1 cordless polisher
1 high-speed battery charger
1 battery pack
1 polishing disc Ø 75 mm (with Velcro fastener)
1 polishing hood, orange (for pre-polishing)
1 polishing hood, black (for final polishing)
1 fake fur attachment
5 75 mm sandpaper 
1 additional handle
1 set of operating instructions

Technical specifications

Cordless polisher PAAP 12 A1:

Rated voltage: 

 12 V   (DC)

Rated speed, 1st gear:   n 0–2800 rpm
Rated speed, 2nd gear:  n 0–8300 rpm
 Polishing disc: 

 Ø 75 mm

Thread: M6

Battery pack: PAPK 12 A2:

Type: 

 LITHIUM  ION

Rated voltage: 

 12 V   (DC)

Cells: 3
Capacity: 

 2000 mAh/24 Wh

High-speed battery charger: PLGK 12 A1

INPUT:

Rated voltage: 

 220–240 V ~, 50–60 Hz 

(AC)

Rated power  
consumption: 

50 W

Fuse (internal): 

2 A 

T2A

OUTPUT:

Rated voltage: 

 12 V   (DC)

Rated current: 

 2400 mA

Charging time: 

 approx . 60 min

Protection  class: 

 II  /  (double insulation)