PAAP 12 A1
GB
│
IE
│
NI
│
CY
│
3
■
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745 . The A-rated noise level of the power
tool is typically as follows:
Sound pressure level: 80 dB(A)
Sound power level:
91 dB(A)
Uncertainty K:
3 dB
Wear ear protectors!
Rated acceleration, typically:
Hand/arm vibration a
h
= 4 .7 m/s
2
Uncertainty K = 1 .5 m/s
2
NOTE
►
The vibration emission value specified in these
instructions has been measured in accordance
with a standardised measuring procedure and
can be used to make equipment comparisons .
The specified vibration emission value can also
be used to make an initial exposure estimate .
WARNING!
►
The vibration emission value varies in accord-
ance with the use of the power tool and may
be higher than the value specified in these
instructions in some cases . Regular use of the
power tool in such a way may cause the user
to underestimate the vibration . Try to keep the
vibration loads as low as possible . Examples
of measures for reducing the vibration load
are wearing gloves when using the tool and
limiting the working time . Wherein all states
of operation must be included (e .g . times
when the power tool is switched off and times
when the power tool is switched on but running
without load) .
Always wear safety goggles.
General power tool
safety warnings
WARNING!
►
Read all safety warnings and all instructions .
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool .
1 . Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b)
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes .
c)
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control .
2 . Electrical safety
a)
Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock .
b)
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or grounded .
c)
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock .
d)
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock .
Summary of Contents for PAAP 12 A1
Page 3: ...A B ...
Page 34: ...PAAP 12 A1 30 DE AT CH ...
