Parkside PAAS 12 A2 Translation Of The Original Instructions Download

Page: 10 / 232

│

■

PAAS 12 A2

If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.

Use of dust collection can reduce dust-related
hazards.

Do not let familiarity gained from frequent
use of tools allow you to become complacent
and ignore tool safety principles.

A careless

action can cause severe injury within a fraction
of a second.

4. Power tool use and care

Do not force the power tool. Use the correct
power tool for your application.

The correct

power tool will do the job better and safer at
the rate for which it was designed.

Do not use the power tool if the switch does
not turn it on and oﬀ.

Any power tool that can-

not be controlled with the switch is dangerous
and must be repaired.

Disconnect the plug from the power source
and/or remove the battery pack, if detacha-
ble, from the power tool before making any
adjustments, changing accessories, or storing
power tools.

Such preventive safety measures

reduce the risk of starting the power tool acci-
dentally.

Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.

Power tools are

dangerous in the hands of untrained users.

Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may aﬀect the power tool’s operation. If
damaged, have the power tool repaired
before use.

Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean.

Properly

maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.

Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.

Use of the

power tool for operations diﬀerent from those
intended could result in a hazardous situation.

Keep handles and grasping surfaces dry,
clean and free from oil and grease.

Slippery

handles and grasping surfaces do not allow
for safe handling and control of the tool in unex-
pected situations.

5. Battery tool use and care

Recharge only with the charger speciﬁed by
the manufacturer.

A charger that is suitable for

one type of battery pack may create a risk of
ﬁre when used with another battery pack.

Use power tools only with speciﬁcally desig-
nated battery packs.

Use of any other battery

packs may create a risk of injury and ﬁre.

When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another.

Shorting the battery

terminals together may cause burns or a ﬁre.

Under abusive conditions, liquid may be ejec-
ted from the battery; avoid contact. If contact
accidentally occurs, ﬂush with water. If liquid
contacts eyes, additionally seek medical
help.

Liquid ejected from the battery may cause

irritation or burns.

Do not use a battery pack or tool that is
damaged or modiﬁed.

Damaged or modiﬁed

batteries may exhibit unpredictable behaviour
resulting in ﬁre, explosion or risk of injury.

Do not expose a battery pack or tool to ﬁre
or excessive temperature.

Exposure to ﬁre

or temperature above 130 °C (265°F) may
cause explosion.

Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range speciﬁed in the instruc-
tions.

Charging improperly or at temperatures

outside the speciﬁed range may damage the
battery and increase the risk of ﬁre.