GB
│
IE
│
7
■
PAAS 12 A2
Practical advice on sawing
■
Check the material to be worked to make sure
that all foreign objects have been removed,
e.g. nails, screws, etc.
■
Switch the appliance off immediately if the saw
blade jams. Open up the sawn gap using a
suitable tool and pull out the reciprocating saw.
■
Saw the material at a constant speed.
Original accessories/auxiliary
equipment
■
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
Information on saw blades
You can use any saw blade that has a suitable
mount – ½” (12.7 mm) universal shaft. Saw
blades are available from retail stores in various
lengths and optimised for a variety of purposes.
NOTE
►
TPI = teeth per inch = the number of teeth per
2.54 cm
Before use
Charging the battery pack
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect
the battery pack to the high-speed battery
charger .
NOTE
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
♦
Connect the battery pack to the high-speed
battery charger .
♦
Insert the power plug into the socket. The
control LED
lights up red.
♦
The green control LED indicates that the
charging process is complete and the battery
pack is ready for use.
♦
Push the battery pack back into the appli-
ance.
♦
You should always switch the high-speed
charger
off for at least 15 minutes between
successive charging processes. Also disconnect
the power plug from the mains power socket.
Summary of Contents for PAAS 12 A2
