background image

PABS 20-Li D5

GB

IE

NI

CY 

│ 

5

 

4.  Power tool use and care

a)  

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at 
the rate for which it was designed.

b)  

Do not use the power tool if the switch does 
not turn it on and off.

 Any power tool that can-

not be controlled with the switch is dangerous 
and must be repaired.

c)  

Disconnect the plug from the power source 
and/or remove the battery pack, if detacha-
ble, from the power tool before making any 
adjustments, changing accessories, or storing 
power tools.

 Such preventive safety measures 

reduce the risk of starting the power tool acci-
dentally.

d)  

Store idle power tools out of the reach of 
children and do not allow persons unfamiliar 
with the power tool or these instructions to 
operate the power tool.

 Power tools are  

dangerous in the hands of untrained users.

e)  

Maintain power tools and accessories. Check 
for misalignment or binding of moving parts, 
breakage of parts and any other condition 
that may affect the power tool’s operation.  
If damaged, have the power tool repaired 
before use.

 Many accidents are caused by 

poorly maintained power tools.

f)  

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edg-
es are less likely to bind and are easier  
to control.

g)  

Use the power tool, accessories and tool bits, 
etc., in accordance with these instructions, 
taking into account the working conditions 
and the work to be performed.

 Use of the 

power tool for operations different from those 
intended could result in a hazardous situation.

h)  

Keep handles and grasping surfaces dry, 
clean and free from oil and grease. 

Slippery 

handles and grasping surfaces do not allow  
for safe handling and control of the tool in  
unexpected situations.

5.  Use and handling of the cordless 

electrical power tool

a) 

 Charge a rechargeable battery using only 
the charger rec

ommended by the manu-

facturer. Chargers are often designed for a 
particular type of rechargeable battery unit. 
There is the danger of fire if other types of 
rechargeable battery units are used.

b)  

Only the rechargeable battery units supplied 
are to be used with an electrical power tool. 

The use of other rechargeable battery units may 
lead to the danger of injury or fire.

c)  

When they are not being used, store re-
chargeable battery units away from paper-
clips, coins, keys, nails, screws or other small 
metal objects that could cause the contacts 
to be bridged. 

Short-circuiting the contacts of 

a rechargeable battery unit may result in heat 
damage or fire.

d)  

Fluids may leak out of rechargeable battery 
units if they are misused. If this happens, 
avoid contact with the fluid. If contact occurs, 
flush the affected area with water. Seek addi-
tional medical help if any of the fluid gets into 
your eyes. 

Escaping battery fluid may cause 

skin irritation or burns.

e)  

Do not use damaged or modified batteries. 

Damaged or modified batteries may behave 
unexpectedly and cause fires, explosions or 
pose a risk of injury.

f)  

Do not expose a battery to fire or excessively 
high temperatures. 

Fire or temperatures in 

excess of 130°C (265°F) can cause an ex-
plosion.

g)  

Follow all instructions regarding charging 
and never charge the battery or the cordless 
tool outside of the temperature range given in 
the operating instructions. 

Incorrect charging 

or charging outside of the permissible tempera-
ture range can destroy the battery and increase 
the risk of fire.

Summary of Contents for PABS 20-Li D5




















































Reviews: