PAEXS 20-Li A1
■
8
│
GB
│
CY
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack
♦
Push the battery pack into the handle until it
clicks into place .
Removing the battery pack
♦
Press the release button and remove the
battery pack .
Checking the battery charge level
♦
To check the battery status, press the battery
charge level button (see fig . A) . The status
will be shown on the battery display LED as
follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Selecting a sanding sheet
Removal and surface
The material removal rate and surface quality are
determined by the grain strength of the sanding
sheet .
♦
Please note that you need to use appropriate
sanding sheets with different grains for working
different materials .
Fitting the sanding sheet
WARNING!
►
Remove the battery pack before carrying out
any work on the appliance .
NOTE
►
Before fitting a new sanding sheet , remove
any dust and dirt from the sanding plate .
Attaching sanding sheets using Velcro
♦
You can attach the sanding sheet to the
sanding plate using the Velcro .
♦
Make sure that the extraction holes on the
sanding sheet match up with those on the
sanding plate .
Removing sanding sheets fitted using Velcro
♦
Simply pull the sanding sheet off the sanding
plate .
Dust extraction
WARNING! RISK OF FIRE!
►
There is a risk of fire when working with
power tools fitted with a dust collection box
or which can be connected to a vacuum
cleaner via the vacuum cleaner adapter! In
unfavourable conditions, e .g . when sparks
are flying while sanding metal or metal
residues in wood, wood dust in the dust sack
(or in the vacuum cleaner dust bag) can
spontaneously ignite . This is a particular risk
if the wood dust is mixed with paint residues
or other chemicals and the workpiece has
become hot after being worked for a long
time . Therefore, do not allow the workpiece
to overheat and always empty the dust box
or the dust bag in the vacuum cleaner before
taking a break from work .
Wear a dust mask!
NOTE
►
Perforated sanding sheets are required for
dust extraction .
Summary of Contents for PAEXS 20-Li A1
