11
GB
IE
a) Lung damage, if suitable respiratory
protection is not worn;
b) Abrasions.
c) Ear damage if working without ear pro
-
tection.
d) Eye damage if suitable eye protection
is not worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.
Initial start-up
Attaching /removing /
emptying dust collection
box
Attaching the dust collection
box:
1. Before connecting, ensure that the dust
collection box (10) is firmly closed.
2. You must keep the dust collection box
(10) slightly slanted when pushing it
on. Slide the dust collection box (10)
all the way onto the connection for dust
extraction (6). The nose of the dust col-
lection box (6) must be inserted into the
groove (10) of the connector (6).
3. Then tighten the dust collection box
(10) clockwise to lock.
Removing the dust
collection box:
4. Grasp the dust collection box (10) by
the black section.
Unlock the dust collection box (10)
counterclockwise and pull the dust col-
lection box (10) off.
Emptying the dust collection box:
5. Open the dust collection box (10) by
squeezing it on the transparent part
and pulling the two parts apart.
6. Pull the filter bag (10a) from the mouth
-
piece.
7. Empty the filter bag.
8. Reattach the filter bag by pulling the
opening of the filter bag over the ring
on the mouthpiece.
9. Close the dust collection box (10)
again. Make sure the filter bag fits cor
-
rectly.
Empty the dust collection box regu
-
larly to ensure optimal suction.
How to connect/remove
external dust extraction
Connecting external dust
extraction:
1. Push the external dust extraction adap-
tor (12) as far as it will go on the dust
extraction connector (6).
2. Connect the extraction hose from a
vacuum cleaner (sold separately) to the
external dust extraction adaptor (12).
Removing external dust extraction
1. Remove the extraction hose from the
external dust extraction adaptor (12).
2. Disconnect the adapter for external
dust extraction (12).
Summary of Contents for PAEXS 20-Li B2
