Parkside PAH 1300 A1, Translation Of The Original Instructions

PAH 1300 A1

■ 

2 

│

GB

│

IE

DEMOLITION HAMMER 
PAH 1300 A1
Introduction

Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product. 
The operating instructions are part of this product. 
They contain important information on safety, us-
age and disposal. Before using the product, please 
familiarise yourself with all operating and safety 
instructions. Use the product only as described and 
for the specified areas of application. Please also 
pass on these operating instructions to any future 
owner.

Intended use

The demolition hammer PAH 1300 A1 is suitable 
for chiselling into concrete, stone and plaster.
Any other usage of or modification to the appliance 
is deemed to be improper and carries a significant 
risk of accidents.
The manufacturer accepts no responsibility for 
damage(s) attributable to misuse.
The appliance is not intended for commercial use.

Depicted components

 Handle (rubberised grip)
  Locking switch

 ON/OFF switch
  Additional handle
  Knurled nut for additional handle
  Chisel adjustment ring
  Tool holder
  Locking collar
  Pointed chisel
  Flat chisel

Package contents

1 demolition hammer PAH 1300 A1
1 additional handle (pre-assembled)
1 flat chisel
1 pointed chisel
1 carrying case
1 set of operating instructions

Technical data

Nominal power:  

 1300 W

Rated voltage: 

 230 V ~ 50 Hz 

(alternating current)

Stroke rate: 

 3800 bpm

Impact energy: 

 15 Joules

Tool fitting: 

 SDS MAX

Protection class: 

 II /   (double shielded)

Noise emission value:

Noise measurement value determined in accordance 
with EN 60745. The A-rated noise level of the 
power tool is typically as follows:

Chiselling:

Sound pressure level: 

 L

pA

 = 87 dB (A)

Uncertainty K: 

 3 dB

Sound power level: 

 L

WA

 = 98 dB (A)

Uncertainty K: 

 3 dB

Wear hearing protection!

Guaranteed sound power level 
LWA in dB.

Total vibration value:

Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:

Main handle:

Chiselling: a

h(CHeq)

 = 21.2 m/s

2

, K = 1.5 m/s

2

Auxiliary handle:

Chiselling: a

h(CHeq)

 = 22.7 m/s

2

, K = 1.5 m/s

2