Parkside PAHS 12 B2, Instruction Manual

PAHS 12 B2

GB

│

IE

│

NI

│

 7

■

1 .)  To remove the battery pack  , press the re-

lease button   and pull the battery pack   
out of the appliance .

2 .)  Insert the battery pack   into the battery 

charger   .

3 .)  Insert the power plug into the socket . The control 

LED   lights up red .

4 .)  The green charge status indicator LED   shows 

you when the charging process is complete and 
the battery pack   is ready for operation .

5 .)  Push the battery pack   back into the appli-

ance .

Checking the battery charge level

If the appliance is switched on, the remaining 
charge will be shown on the battery LED   as 
follows:
RED/ORANGE/GREEN = maximum charge

RED/ORANGE = medium charge

RED = low charge – charge the battery

Operation

NOTE

►

Always switch the sander on before applying 
it to the workpiece . 

Switching the appliance on:

♦

Press the ON/OFF switch   .

Switching the device off:

♦

Press the ON/OFF switch   .

Dust extraction

 WARNING! RISK OF FIRE!

►

When working with power tools that have a 
dust collection box or can be connected to 
a vacuum cleaner via the vacuum cleaner 
adapter, there is a risk of fire! In unfavourable 
conditions, e .g . when sparks are flying while 
sanding metal or metal residues in wood, 
wood dust in the dust sack (or in the vacuum 
cleaner dust bag) can spontaneously ignite . 
This is a particular risk if the wood dust is 
mixed with paint residues or other chemicals 
and the workpiece has become hot after 
being worked for a long time . Therefore, do 
not allow the workpiece to overheat and 
always empty the dust box or the dust bag 
of the vacuum cleaner before taking a break 
from work .

Wear a dust mask!

WARNING!

►

Always disconnect the battery pack   be-
fore carrying out any work on the appliance .

Dust collection box

Connection:

♦

Push the dust collection box   onto the multi-
sander as far as the stop   .

Removal:

♦

Press the release button   of the dust collection 
box   and pull it off towards the rear .

NOTE

►

To achieve optimum dust extraction, the dust 
collection box   should be emptied 
regularly . 

♦

To do this, remove the dust collection box   
from the appliance as described above . Open 
the dust box by pulling on the tab   and then 
removing the lid . Clean both parts thoroughly 
by tapping them out .