PAK 16 A1 / PALP 16 A1
GB
│
MT
│
49
■
Safety instructions for battery
chargers & blowers
■
This appliance may be used by
children aged 8 and above and
by persons with limited physical,
sensory, or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
The charger is suitable for
indoor use only.
WARNING!
■
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards.
Before use:
Charging the battery pack (see fig. A)
CAUTION!
►
Always unplug the appliance before you re-
move the battery pack from or connect
the battery pack to the charger.
NOTE
►
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hours. This guarantees
full battery power. Li-ion batteries can be
charged at any time without adversely affect-
ing their service life. Interruption of the charg-
ing process will not damage the battery.
►
Never charge the battery pack when
the ambient temperature is below 10°C or
above 40°C. If a lithium-ion battery is to be
stored for an extended period, the charge level
should be checked regularly. The optimum
charge level is between 50% and 80%. The
storage climate should be cool and dry and
the ambient temperature should be between
0°C and 50°C.
♦
Insert the battery pack into the high-speed
charger .
♦
Insert the power plug into the socket. The
control LED lights up red to indicate that the
appliance is charging.
♦
The green control LED indicates that the
charging process is complete and the battery
pack is ready for use.
♦
Push the battery pack back onto the
appliance.
♦
Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains
power socket.
IB_280447_PAK16A1_PALP16A1_LB5.indb 49
16.11.16 13:28
Summary of Contents for PAK 16 A1
