PAMFW 12 C3
■
20
│
GB
│
IE
Safety guidelines for battery chargers
■
This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks.
Do not allow children to play with
the appliance. Cleaning and user
maintenance tasks may not be car-
ried out by children unless they are
supervised.
■
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer or the manu-
facturer’s customer service depart-
ment or a similarly qualified person.
This charger is suitable for indoor use
only.
WARNING!
■
Do not operate the appliance with a dam-
aged cable, power cable or power plug.
A damaged power cableposes a threat of
fatal electric shock.
Working procedures
Working principle:
The oscillating drive causes the application tool to
move back and forth at a speed of 5000–19000
times per minute. This allows for precision work
even in confined spaces.
Sawing/cutting:
■
Use only undamaged saw blades that are in
perfect working order. Bent, blunt or otherwise
damaged saw blades may break.
■
When sawing lightweight construction materials,
follow the statutory regulations and all recom-
mendations from the material manufacturers.
■
Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process.
Sanding:
■
To prolong the service life of the sanding sheets
, ensure that you apply even pressure.
Before use
Removing/charging/inserting the
battery pack
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect
the battery pack to the charger.
NOTE
►
The battery is supplied partially charged. Ide-
ally, fully charge the battery before use. You
can charge the lithium-ion battery at any time
without shortening its service life. Interrupting
the charging process does not damage the
battery.
■
Never charge the battery pack when the
ambient temperature is below 10°C or above
40°C.
1. To remove the battery pack , press the release
button and pull the battery pack out of the
appliance.
2. Insert the battery pack into the high-speed
charger .
3. Insert the mains plug into the socket. The control
LED lights up red.
4. The green charge status indicator LED indi-
cates that the charging process is complete and
the battery pack is ready.
5. Insert the battery pack into the appliance.
Checking the battery charge level
♦
Press the ON/OFF switch to check the status
of the battery (see also main diagram). The
status/remaining charge will be shown on the
battery display LED as follows:
Summary of Contents for PAMFW 12 C3
Page 3: ...Z52 A1 Z64 B2 HCS C...
Page 58: ...PAMFW 12 C3 54 NL BE...
Page 86: ...PAMFW 12 C3 82 CZ...
Page 100: ...PAMFW 12 C3 96 SK...
