■
44
│
GB
│
MT
PAS 4 B3
Changing bits/screw driver bits
(see fig. D)
Inserting:
♦
Insert the bit into the tool holder .
Removal:
♦
Pull the bit out of the tool holder .
Replacing the cutting blade
(see figs. E + F)
NOTE
►
Before carrying out any work on the
appliance, ensure that the rotation direction
switch is in the middle. This prevents
unintentional switching on.
♦
Start by connecting the cutting attachment
to the appliance. This blocks the motor spindle
and allows the screw to be removed.
♦
Unscrew the screw (I).
♦
Remove the cutting blade (II) by pulling it
downwards.
♦
Push in a new cutting blade (II) from below
ensuring that the ground edge of the blade
faces you.
Turn around the blade (II) until it fits onto the
tool fitting (III).
♦
Tighten the screw (I).
♦
The attachment can now be used again.
CAUTION!
►
There is an arrow ( ) on the blade guard
of the cutting attachment. This shows you
the recommended running direction of the
cutting blade.
Operation
Switching the cordless screwdriver
on/off
Switching on:
♦
To start the appliance, press the ON/OFF
switch and keep it pressed in.
Switching off:
♦
Release the ON/OFF switch to switch off the
appliance.
Changing the direction of rotation
Clockwise:
♦
Push the rotation direction switch to the left.
♦
Press the ON/OFF switch . The clockwise
rotation indicator lights up. You can now
screw in the screws.
Anti-clockwise:
♦
Push the rotation direction switch to the right.
♦
Press the ON/OFF switch . The anticlockwise
rotation indicator lights up. You can now
unscrew the screws.
Safety lock-out:
♦
Push the rotation direction switch into the
middle position. The ON/OFF switch is
blocked.
NOTE
►
When the ON/OFF switch is locked it is
still possible to activate the LED lamps .
To do this, press the ON/OFF switch .
Tips and tricks
Screw bits are labelled according to their dimen-
sions and their shape. If you are unsure, always try
the particular screw bit out to see whether it sits in
the screw head without any free play.
Summary of Contents for PAS 4 B3
Page 3: ...9a 9b...
Page 4: ...A B C D F E I II III...