■
42
│
GB
│
MT
PAS 4 C4
Safety guidelines for screw drivers
WARNING!
■
Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring or its own cord.
If a screw comes into
contact with a live wire, this may make ex-
posed metal parts of the power tool live and
could give the operator an electric shock.
Safety guidelines for the cutting
attachment
DANGER!
■
Keep your hands clear of the cutting area
and the cutting blade.
■
Before carrying out any work on the appli-
ance, ensure that the rotation direction switch
is in the middle. This prevents unintentional
switching on.
■
Do not cut unless the blade guard is fully
functional. Defective blade guards will not
protect you against unintentional contact with
the cutting blade.
■
Before each use, check whether the blade
guard is perfect condition and that the cutting
blade is firmly fitted.
■
Always use cutting blades of the correct size
and with an appropriate central fixing bore.
Safety guidelines for battery chargers
■
This appliance may be used by
children aged 8 years and above
and by persons with limited physi-
cal, sensory or mental capabilities
or lack of experience and know-
ledge, provided that they are un-
der supervision or have been told
how to use the appliance safely
and are aware of the potential
risks. Do not allow children to
use the appliance as a plaything.
Cleaning and user maintenance
tasks may not be carried out by
children unless they are super-
vised.
The charger is suitable for
indoor use only.
■
If the connecting cable needs to
be replaced, this must be carried
out by the manufacturer or an
official representative in order to
avoid safety hazards.
WARNING!
To charge the battery in this appli-
ance , only use the supplied charger .
Summary of Contents for PAS 4 C4
Page 3: ...9a 9b...
Page 4: ...A B C D F E I II III...
