22
PASS 3.6 B2
GB
Anti-clockwise:
♦
Push the rotation direction switch to the right.
♦
Press the ON/OFF switch . You can now
unscrew the screws.
Safety lock-out:
♦
Push the rotation direction switch into the
middle position. The ON/OFF switch is
blocked.
Switch LED on / off
Switching on:
♦
Press the ON/OFF switch and keep it
pressed in.
Switching off :
♦
Release the ON/OFF switch .
Adjusting the handle
The screwdriver can be locked into two diff erent
handle settings To do this, press the locking button
and set the screwdriver into the desired position.
Afterwards, release the locking button .
Torque setting
The torque for a specifi c screw size can be set using
the torque setting . The required torque is depend-
ent on an number of factors:
- the type and hardness of the material being
worked.
- the type and length of the screws being used.
- the demands being put on the screw joint.
When the set torque is reached, this is indicated
by the actuation of the clutch.
Battery level display
The battery level display indicates the charge
level using 3 coloured LEDs.
All LEDs are lit up:
The battery is fully charged.
Red and yellow LEDs lit:
The battery has a suffi cient remaining charge.
Red LED:
The battery is fl at. Recharge it.
Tips and tricks
Screw bits are labelled according to their dimen-
sions and their shape. If you are unsure, always try
the particular screw bit out to see whether it sits in
the screw head without any free play.
Maintenance and cleaning
RISK OF ELECTRIC SHOCK!
Before
cleaning, disconnect the charger
from
the mains socket.
The cordless screwdriver is maintenance-free.
■
The appliance must always be kept clean, dry
and free from oil or grease.
■
Never allow fl uids to get into the appliance.
■
Use a soft cloth to clean the appliance housing.
Never use benzine, solvents or cleansers which
can damage plastic.
IB_96266_PASS3.6B2_LB2.indb 22
IB_96266_PASS3.6B2_LB2.indb 22
23.12.13 17:04
23.12.13 17:04
Summary of Contents for PASS 3.6 B2
Page 3: ...A B...
