Parkside PASS 3.6 B2, Manual

18

PASS 3.6 B2

GB

CORDLESS SCREWDRIVER 
PASS 3.6 B2

Introduction

Congratulations on the purchase of your 

new appliance. You have selected a high-
quality product. The operating instructions 

are part of this product. They contain important 
information on safety, use and disposal. Before 
using the product, familiarise yourself with all 
operating and safety instructions. Use this product 
only as described and only for the specifi ed areas 
of application. Please also pass these operating 
instructions on to any future owner(s).

Proper use

This appliance is designed for screwing into wood, 
plastic and metal. Use the appliance only as described 
and only for the areas of application specifi ed. 
Any other uses or modifi cations to the appliance 
are deemed to be improper usage and may result 
in serious  physical injury. Not for commercial use.

Features

  ON/OFF switch

  Rotation direction switch/safety lock-out

  LED

  Tool holder

  Locking collar

  Torque setting

  Battery level display

  Locking button

  Charging socket (appliance)

  Charger

Package contents

  1  cordless screwdriver PASS 3.6 B2

  1  charger PASS 3.6 B2-1

 1 carrying case

 24  bits x 25 mm

  2  bits x 50 mm

 1 bit extension

 1 operating instructions

Technical details

Cordless screwdriver: PASS 3.6 B2

Rated voltage: 

 3.6 V 

Battery (integrated): 

 LITHIUM-ion

Battery capacity: 

 1500 mAh

Nominal idle speed: 

 n

0 

= 200 min

-1

Torque: 

 max. 4.0 Nm

Tool holder: 

 6.35 mm (¼")

Charger: 

PASS 3.6 B2-1

INPUT:

Rated voltage: 

 230 - 240 V∼ 50/60 Hz

Rated current: 

 200 mA

OUTPUT:

Rated voltage: 

 5.5 V 

Rated current: 

 600 mA

Charging time: 

 approx. 3 hours

Protection class: 

 II / 

Noise and vibration data:

Noise measurement determined in accordance 
with EN 60745 The A-rated noise level of the 
power tool is typically:

Sound pressure level:    57 dB(A)

Sound power level: 

  68 dB(A)

Uncertainty K: 

   3 dB

Vibration values (vector total of three directions) 
determined in accordance with EN 60745

Screws: Vibration emission value ah = 0.393 m/s

2

Uncertainty K = 1.5 m/s

2

The vibration level specifi ed in these instructions has 
been measured in accordance with the standardised 
measuring procedure specifi ed in EN 60745 and 
can be used to make equipment comparisons. 
The specifi ed vibration emission value can also 
be used to make an initial exposure estimate. The 
vibration level varies in accordance with the use of 
the power tool and may be higher than the value 
specifi ed in these instructions in some cases. It is 
easy to underestimate the vibration load if the 
electrical power tool is used regularly in a certain 
manner.

IB_96266_PASS3.6B2_LB1.indb   18

IB_96266_PASS3.6B2_LB1.indb   18

23.12.13   17:04

23.12.13   17:04