PAT 12 A1
GB
│
MT
│
39
■
High-speed battery charger PLGK 12 B2*
INPUT
Rated voltage
220–240 V ∼ (AC),
50–60 Hz
Power consumption
75 W
OUTPUT
Rated voltage
12 V
(DC)
Rated current
4.5 A
Charging time
approx. 60 min
Fuse (internal)
3.15 A
T3.15A
Protection class
II /
(double insulation)
* BATTERY AND CHARGER ARE NOT SUPPLIED
Typ 53
6–14 mm
Wire staples
Staple width
11.4 mm outside
Staple length
6–14 mm
Typ 47
14–15 mm
Nail length
14–15 mm
Noise emission value
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
pA
= 84.1 dB (A)
Uncertainty
K
pA
=
3 dB
Sound power level
L
WA
= 95.1 dB (A)
Uncertainty
K
WA
= 3 dB
Wear hearing protection!
Total vibration value
Vibration values determined in accordance with
EN 60745:
Vibration emission value
a
h,W
= 3.65 m/s
2
Uncertainty K
=
1.5
m/s
2
NOTE
►
The vibration emission value specified in these
instructions has been measured in accordance
with a standardised measuring procedure and
can be used to make equipment comparisons.
The specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
►
The vibration emission value varies in accord-
ance with the use of the power tool and may
be higher than the value specified in these
instructions in some cases. Regular use of the
power tool in such a way may cause the user
to underestimate the vibration. Try to keep the
vibration loads as low as possible. Examples
of measures for reducing the vibration load
are wearing gloves when using the tool and
limiting the working time. Wherein all states
of operation must be included (e.g. times
when the power tool is switched off and
times where the power tool is switched on
but running without load).
General power tool
safety warnings
WARNING!
►
Read all safety warnings and all instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
IB_329403_PAT12-LiA1_LB5.indb 39
06.08.20 14:18
Summary of Contents for PAT 12 A1
Page 3: ...A B...
