PAT 20-Li A1
GB
│
MT
│
31
■
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
♦
Allow the battery pack to click into place in
the appliance .
Removing the battery pack:
♦
Press the release button and remove the
battery pack .
Checking the battery charge level
♦
Press the battery charge level button to
check the status of the battery (see also main
diagram) .
The status will be shown on the battery display
LED as follows:
♦
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Filling the magazine shaft
Remove the battery before carrying out any
work on the power tool (e.g. maintenance,
changing tools, etc.) as well as during the trans
port and storage of the power tool.
Unintentional activation of the trigger can result in
injury .
♦
Remove the battery pack from the appliance .
♦
Turn the appliance around .
♦
Press the release together (see fig . B) .
♦
Pull the magazine slider backwards
(see fig . B) .
♦
Fill the magazine shaft with staples or nails
(see fig . C) .
NOTE
►
Ensure the correct position for the nails
(see main diagram, face plate on the
appliance) .
♦
After filling, push the release into the maga-
zine shaft as far as the stop until it clicks into
place .
NOTE
►
The fill level indicator shows whether the
magazine contains staples .
Setting the impact force
NOTE
►
Select the lowest impact force sufficient for
stapling . Take into account the length of the
staples or nails you are using as well as hard-
ness of the material you are working with .
Increasing the impact force:
♦
Turn the impact force control clockwise .
Reducing the impact force:
♦
Turn the impact force control anticlockwise .
Operation
Switch on
♦
Press the tacker nose onto the location on
the material that you want to staple until it is
pushed in a few millimetres .
♦
Press the trigger .
Switching on the LED work light
♦
Press the button for the LED work light to illu-
minate your workspace in unfavourable lighting
conditions .
Summary of Contents for PAT 20-LI A 1
Page 3: ...10 20 30 40 50 A B C...
