Parkside PBF 400 A1, Translation Of The Original Instructions

■ 

12 

│

GB

│

MT

PBF 400 A1

BANDFILE  PBF 400 A1
Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product.  
The operating instructions are part of this product. 
They contain important information about safety, 
usage and disposal. Before using the product, please 
familiarise yourself with all operating and safety 
instructions. Use the product only as described and 
for the range of applications specified. Please also 
pass these operating instructions on to any future 
owner.

Intended use

The bandfile is designed for filing work, especially 
on difficult-to-access locations, on wood, plastic, 
metal and fillers in addition to painted surfaces. 
Please note that you need to use appropriate 
grinding belts with different grains for working dif-
ferent materials, and that you may need to adapt 
the speed to suit the material. The appliance is not 
intended for commercial use. Any other uses of 
or modification to the appliance is deemed to be 
improper and carries the risk of serious personal 
injury. The manufacturer accepts no responsibility 
for damage(s) attributable to misuse.

Features

 Speed control
 Locking button
 Handle
  ON/OFF switch
 Dust bag
 Side handle
 Assembly and adjusting screw
 Grinding frame, large
 Clamping lever
 Dust extraction adapter
 Abrasive belt
 Grinding frame, small
 Grinding frame, angled
 Spring
 Front roller
 Adapter fitting

Package contents

1 bandfile  PBF 400 A1
5  abrasive belts for metal, wood, 8 x 455 mm
(2 x 60 grain, 2 x 80 grain, 1 x 120 grain)
5  abrasive belts for metal, wood, 13 x 455 mm
(2 x 60 grain, 2 x 80 grain, 1 x 120 grain)
1 dust bag
1  dust extraction adapter (for external dust  

extraction)

1 straight frame, 8 mm
1 straight frame, 13 mm
1 angled frame, 13 mm
1 carrying case
1 set of operating instructions

Technical details

Rated voltage:  

 230 V ∼ 50 Hz 
(alternating current)

Rated  
power consumption: 

 400 W

Idling belt speed: 

 1070–1650 m/min

Rated idling speed: 

 n

0

 2350–3600 

rpm

Abrasive belt: 

 8 x 455 mm and  
13 x 455 mm

Protection class: 

 II /   (double insulation)

Noise emission value:

Noise measurement value determined in accord-
ance with EN ISO 4871. The A-rated noise level 
of the power tool is typically:
Sound pressure level: 

 L

pA

 = 82 dB(A)

Uncertainty:  

K

pA

 = 3 dB

Sound power level: 

 L

WA

 = 93 dB(A)

Uncertainty:  

K

WA

 = 3 dB

Wear hearing protection!