11
NI
IE
tion in the hands caused by vibrations
(Raynaud’s syndrome). However, the
usage duration can be extended with
suitable gloves or regular breaks. Be
aware that personal tendency to poor
circulation, low external temperatures
and high gripping forces will reduce
the usage duration when working.
15. Be aware of damaged parts. If the
device suffers a heavy impact or is
dropped, check it for signs of damage
and wear before putting it back into op-
eration. Are individual parts damaged?
In case of slight damage ask seriously
whether the tool will nonetheless work
properly and safely. Ensure correct
alignment and adjustment of moving
parts. Do the parts interlock correctly?
Are parts damaged? Is everything cor-
rectly installed? Are all the other require-
ments in place for proper functioning?
Damaged safety devices etc must be
repaired or replaced by authorised peo-
ple if there is no explanation otherwise
in the operating instructions. Defective
switches must be replaced by an au-
thorised body. If repairs are required,
please contact a customer service cen-
tre authorised by us.
16. Always switch off the engine before un-
dertaking adjustments or maintenance
work. This particularly applies for work
on the thread reel.
17. Use only authorised parts. In case of
maintenance and repair, use only iden-
tical spare parts. Contact the service
centre for spare parts.
Warning! The use of other mowing
heads as well as accessories and
attachments that are not explicitly
recommended can result in danger
to people and objects.
The tool is to be used only for the
intended purpose. Any misappro-
priation is regarded as improper
use. The user alone – and deinitely
not the manufacturer – is responsible
for property and personal damage
resulting from such improper use.
The manufacturer cannot be held li-
able if machines from the same are
modiied or used improperly and
damage occurs as a result.
Caution! A certain residual risk,
which cannot be eliminated, always
remains even in the case of proper
use of the tool. The following po-
tential hazards can be derived from
the type and design of the tool:
• Contact with the unprotected thread
reel (cuts).
• Reaching into the thread reel when it is
running (cuts).
• Hearing damage if no appropriate
protection is worn.
• Dust and gas formation that is harmful
to health if the equipment is used in
enclosed spaces (nausea).
Additional Safety
Regulations
1. Caution! Always keep hands and feet
away from the cutting area, particularly
when starting the equipment. Always
keep the hand on the extra handle free.
2. Always hold the device with both hands
on the multi-functional handlebars.
Always keep the equipment at an ap-
propriately safe distance from the body
and assume a stable body position.
Always use the carrying strap.
3. Always wear safety goggles.
4. Use the equipment only in daylight or
with the option of good artiicial lighting.
Summary of Contents for PBS 2 A1
