11
GB
IE
NI
CY
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Cleaning
Clean the charger and the battery with a
dry cloth or with a paint brush. Do not use
water or metal objects.
Maintenance
The appliance cleaner is maintenance free.
Disposal and protection
of the environment
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Machines do not belong with do
-
mestic waste.
Do not dispose of batteries in house-
hold waste, fire (risk of explosion) or
water. Damaged batteries may dam-
age the environment and your health
if toxic fumes or liquids leak out.
• Return the unit to a recycling centre.
The plastics and metals in the unit can
be sorted and appropriately recycled.
Ask our Service Centre for details.
• Dispose of batteries in discharged con-
dition. We recommend covering the
pole with adhesive tape to prevent a
short circuit. Do not open up the battery.
• Dispose of batteries in accordance with
the local regulations. Take batteries to
an old battery collection point where
Storage
• Only store the batteries in the partially-
charged state. During prolonged stor-
age, 2 to 3 LEDs should be illuminated.
• Remove the battery before storing the
unit for longer periods of time.
• During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
• The ideal storage temperature for the
battery is between 0 °C and 45 °C.
Avoid extreme cold or heat during stor
-
age to ensure the battery output is not
adversely affected.
Wall mounted charger
(optional)
You can also mount the charger (3) on the
wall.
• Using dowels, place two screws 54 mm
apart at the desired position of a wall.
• The screw head can have a diameter of
6 - 10 mm
• Leave the screw heads protruding at
a distance of approx. 10 mm from the
wall.
• With the openings of the wall bracket,
you can attach the charger (3) to the
two screws and pull the charger down
until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to find these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fire. Contact with a gas pipe
Summary of Contents for PBSA 12 D2
