GB
│
IE
│
NI
│
11
■
PDFS 1300 A1
Handling the appliance
1 . Switch on the appliance – as described in
"Switching on and off" – and then place it
with the front edge of the base plate on
the material .
2 . Align the machine using the rip fence or
by using a marked line .
3 . Hold the machine by the handle and housing
with both hands . Guide it using moderate
pressure .
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■
Store the appliance in a dry and dust-free lo-
cation .
■
Cutting discs must be kept dry and must not be
stacked .
■
The appliance must always be clean and free of
oil or grease .
■
Use a soft, dry cloth to clean the housing .
■
The carbon brushes should only be replaced
by the service centre or an authorised specialist
workshop .
■
Ventilation openings must never be obstructed .
■
Remove any adhering swarf with a brush .
WARNING!
■
If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards .
NOTE
►
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline .
Disposal
The packaging consists of environmentally
friendly material . It can be disposed of in
the local recycling containers .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product .
Summary of Contents for PDFS 1300 A1
Page 3: ...A B C ...
Page 4: ...E D F ...
