GB
- 12 -
The following lubrication options are available:
7.1 Lubrication by mist oiler
Connect a complete conditioning unit with mist
oiler between the compressed air source and the
chisel hammer. A conditioning unit is available
from your dealer. It is not included in the scope of
this delivery.
7.2 Lubrication by hand
Each time before using the compressed air tool
insert 3-5 drops of special compressed air oil into
the compressed air connection. If the compressed
air tool has not been used for several days you
must insert 5-10 drops of special compressed
air oil into the compressed air connection before
switching on. Store your compressed air tool only
in a dry room.
7.3 Other maintenance
There are no parts inside the equipment which
require additional maintenance.
8. Excluded from the guarantee
are
•
Wear parts
•
Damage caused by too much operating pres-
sure.
•
Damage caused by non-conditioned com-
pressed air.
•
Damage caused by improper use or unautho-
rized intervention.
9. Cleaning and ordering of
spare parts
Important: Disconnect the equipment from the
compressed air supply before you carry out any
maintenance or cleaning work.
9.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the
plastic parts of the equipment. Ensure that no
water can seep into the device.
9.2 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
For our latest prices and information please go to
www.isc-gmbh.info
10. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C. Store the equipment
in its original packaging.
Anleitung_4139033_LB4.indb 12
Anleitung_4139033_LB4.indb 12
03.04.12 10:27
03.04.12 10:27
