12 GB/IE/CY
2. Push the cutting element
18
sideways out from
the blade shaft
17
.
3. Push the planer blade
20
sideways out from
the cutting element
18
.
NOTE:
The blade shaft
17
can also be taken
apart, e.g. for cleaning.
4. Reassembly is carried out in the reverse order
with a reversed or new planer blade.
5. Planer blades
20
can be obtained from the service
address indicated (see section about warranty).
Replacing a drive belt
(see Figs. F + G)
WARNING!
DANGER OF INJURY!
Before you carry out any work on the device always
pull the mains plug out of the mains socket.
Release the screws
5
and remove the belt
cover
4
.
Remove the worn drive belt
23
.
First place the new drive belt
23
on to the small
belt wheel
25
and then pull the drive belt
23
on to the large belt wheel
24
by rotating it.
Put the belt cover
4
back into position and
fasten it into place with the screws
5
.
Maintenance and cleaning
WARNING!
DANGER OF INJURY!
Before you carry out any work on the device al-
ways pull the mains plug out of the mains socket.
Always keep the device and the ventilation
slots clean. This way you will work more safely
and produce better results.
Clean out the planing debris removal port
3
regularly.
Clean out a blocked planing debris removal
port using suitable means (e.g. piece of wood,
air under pressure, etc.).
Use a dry cloth to clean the housing.
Remove any adhering planing dust with a nar-
row paint brush.
In no circumstances use sharp objects, or petrol,
solvents or cleaning agents that might attack
plastic. Do not allow any liquids to enter the
inside of the device.
Service centre
WARNING!
Have your device repaired
only by qualified specialist personnel
using original manufacturer parts
only.
This will ensure that your device remains
safe to use.
WARNING!
If the plug or mains lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre.
This
will ensure that your device remains safe to use.
Warranty
This appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
pertaining to the warranty. Your goods
can be transmitted free of cost only in this
manner. This warranty applies only to the
initial purchaser and is non-transferable.
The warranty covers only material or manufacturing
faults, not normal wear or damage to fragile parts
such as switches or rechargeable batteries. The
appliance is intended solely for private, not com-
mercial, use.
If this product has been subjected to improper or
inappropriate handling, abuse, or interventions not
carried out by one of our authorised sales and
service outlets, the warranty will be considered void.
This warranty does not affect your statutory rights.
GB
DES UK LTD
Tel.:
0871 5000 700 (£ 0,10 / minute)
e-mail: support.uk@kompernass.com
Preparing for use / Maintenance and cleaning / Service centre / Warranty
