background image

6 GB/IE/CY

Electric planer PEH 30 

 Introduction

   Please make sure you familiarise your-

self fully with the way the device works 
before you use it for the first time and

that you understand how to handle electrical power 
tools correctly. To help you do this please read the 
accompanying operating instructions. Keep these 
instructions in a safe place. If you pass the device 
on to anyone else, please ensure that you also 
pass on all the documentation.

 Proper use

The device is suitable for planing wood in the form 
of beams or boards or the like if the workpiece is 
held securely in a fixed position. The device is also 
suitable for chamfering edges and for rebating. 
Any other use or modification to the device shall be 
considered as improper use and could give rise to 
considerable risk of accident. The manufacturer will 
not accept liability for loss or damage arising from 
improper use. Not suitable for commercial use.

  Features and equipment

1

  Safety lock-out 

2

  ON / OFF  switch

3

  Planing debris removal port (right / left selectable)

4

 Belt cover

5

  Belt cover screws

6

 Guide fence

7

  Guide fence fixing screws

8

  Fixing nut for setting rebate width

9

 Sole

10

 V-groove

11

  Rebate depth stop fixing screw

12

  Rebate depth stop

13

  Rotary control for setting planing depth

14

  Cutting depth scale

15

 Reducer piece

16

 Parking shoe

17

 Blade shaft

18

 Cutting element

19

  Plane blade fixing screws

20

 Plane blade

21

  Side blade shaft guard

22

 Allen key

23

 Drive belt

24

  Large belt wheel

25

  Small belt wheel

26

 Open spanner

Introduction

The following pictograms are used in these operating instructions / on the device:

Read instruction manual! 

Safety class II

Observe caution and safety notes!

Wear hearing protection, dust 
protection mask, protective glasses 
and protective gloves.

Caution – electric  shock!
Danger to life!

Keep children away from 
electrical power tools!

Explosive material!

For indoor use only!

V~

Volt (AC)

Check that the device, mains lead 
and plug are in good condition!

W

Watts (Effective power)

Dispose packaging and appliance in 
an environmentally-friendly way!

n

0

Design no-load speed

Summary of Contents for PEH 30















Reviews: