Parkside PEXS 270 A1 - 7, Manual

8 GB/CY

oil, sharp edges or moving parts of the 
device.

Damaged or tangled mains leads  

increase the risk of electric shock.

e) 

 When working outdoors with an  
electrical power tool always use ex-
tension cables that are also approved 
for use outdoors.

The use of an extension 

cable suitable for outdoor use reduces the risk 
of electric shock.

f) 

 Use a residual current device (RCD) 
for protection if operating the electri-
cal power tool in a moist environment 
is unavoidable.

The use of an RCD reduces 

the risk of electric shock.

3. Personal safety

a) 

 Remain alert at all times, watch what 
you are doing and always proceed  
with caution. Do not use the device if 
you are tired or under the influence of 
drugs, alcohol or medication.

One moment 

of carelessness when using the device can lead 
to serious injury.

b) 

 Wear personal protective 
equipment and always wear 
safety glasses.

The wearing of 

 personal protective equipment such as dust 
masks, non-slip safety shoes, safety helmets or 
ear protectors, appropriate to the type of elec-
trical power tool used and work undertaken, 
reduces the risk of injury.

c) 

 Avoid unintentional operation of the 
device. Check that the electrical power 
tool is switched off before you connect 
it to the mains, pick it up or carry it. 

Accidents can happen if you carry the device 
with your finger on the ON / OFF switch or with 
the device switched on.

d)  

Remove any setting tools or spanners 
before you switch the device on.

A tool 

or spanner left attached to a rotating part of a 
device can lead to injury.

e)  

Avoid placing your body in an unnat-
ural position. Keep proper footing and 
balance at all times.

By doing this you will  

be in a better position to control the device in 
unforeseen circumstances. 

f)

   Wear suitable clothing. Do not wear 

loose clothing or jewellery. Keep your 
hair, clothing and gloves clear of mov-
ing parts. 

Loose clothing, jewellery or long 

hair can become trapped in moving parts.

g) 

 If vacuum dust extraction and collection 
devices are fitted do not forget to check 
that they are properly connected and 
correctly used.

The use of these devices  

reduces the hazard presented by dust.

4.

Careful handling and use  
of electrical power tools

a)

Do not overload the device. Always 
use an electrical power tool that is  
intended for the task you are under-
taking.

By using the right electrical power 

tool for the job you will work more safely and 
achieve a better result. 

b)

Do not use an electrical power tool if 
its switch is defective.

An electrical power  

tool that can no longer be switched on and off 
is dangerous and must be repaired. 

c)

 Pull the mains plug from the socket 
before you make any adjustments to 
the device, change accessories or when 
the device is put away. 

This precaution is 

intended to prevent you from unintentionally 
starting the device. 

d)

When not in use always ensure that 
electrical power tools are kept out of 
reach of children. Do not let anyone use 
the device if he or she is not familiar 
with it or has not read the instructions 
and advice.

Electrical power tools are dan-

gerous when they are used by inexperienced 
people. 

e)

Look after the device carefully. Check 
that moving parts are working prop-
erly and move freely. Check for any 
parts that are broken or damaged 
enough to detrimentally affect the 
functioning of the device. Have dam-
aged parts repaired before you use 

General safety advice for electrical power tools