Parkside PEXS 270 A1, User Manual

2

PEXS 270 A1

GB

IE

RANDOM ORBITAL SANDER 
PEXS 270 A1
Introduction

Congratulations on the purchase of your 

new appliance. You have selected a high-
quality product. The operating instructions 

are part of this product. They contain important infor-
mation on safety, usage and disposal. Before using 
the product, familiarise yourself with all operating 
and safety instructions. Use the product only as de-
scribed and for the specified areas of application. 
Please also pass on these operating instructions to 
any future owner.

Intended use

This appliance is intended for the dry sanding of 
wood, metal and paintwork. Any other uses of or 
modification to the appliance is deemed to be im-
proper and carries the risk of serious personal inju-
ry. The manufacturer accepts no responsibility for 
damage attributable to misuse. This appliance is 
not intended for commercial use.

Features

  ON/OFF switch
  Lock button
  Dust catcher
  Pad
  Sanding disc
  Exhaust vent
  Adapter for external vacuum extraction
  Reducer

Package contents

  1  random orbital sander PEXS 270 A1
 1 dust catcher
 1 sanding disc
  1  adapter for external vacuum extraction
 1 reducer
 1 operating instructions

Technical data

Rated voltage: 

 230 V ~ 50 Hz

Nominal power: 

 270 W

Idle oscillation speed:   n

0 

= 24000 rpm

Idle speed: 

 n

0 

= 12000 rpm

Grinding disc: 

 ø 125 mm

Protection class: 

 II / 

Noise and vibration data:

Noise measurement value determined in ac-
cordance with EN 60745. The A-rated noise level 
of the power tool is typically as follows:
Sound pressure level L

PA

:    80 dB(a)

Sound power level L

WA

:   91  dB(A)

Uncertainty K:  

   3 dB(a)

Wear hearing protection!

Vibration values (vector total of three directions)  
determined in accordance with EN 60745:
Vibration emission value a

h

 = 6.8 m/s

2

Uncertainty K = 1.5 m/s

2

NOTE

►

The vibration level specified in these inst-
ructions has been measured in accordance 
with the standardised measuring procedure 
specified in EN 60745 and can be used to 
make equipment comparisons. The specified 
vibration emission value can also be used to 
make an initial exposure estimate.