17
IE
GB
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
-
Random orbital sander
-
Dust collection box
-
Adapter for external dust extraction
-
Sanding sheet, grit size 120
-
Instruction Manual
Overview
1 Locking button
2 On/off switch
3 Dust collection box
4 Sanding disc
5 Rotational speed selection wheel
6 Adapter for external vacuuming
7 Sanding sheet
8 Filter insert
9 Connection for dust extraction
10 Connection groove
Functional description
The orbital sander has a rotating sanding
disc for processing wood, metal or paint.
Please refer to the descriptions below for infor-
mation on how the operating elements work.
Technical data
Random orbital sander . PEXS 270 C3
Nominal voltage U ............ 230V~; 50 Hz
Power input P ..............................270 W
Idle speed n
0
.............7000 - 12000 min
-1
Idle oscillation rate n
0
..14000 - 24000 min
-1
Weight ............................approx. 1.6 kg
Sanding disc .......................... ø 125 mm
Protection class .................................II
Protection type ................................. IPX0
Sound power level
(L
pA
) ...................... 91 dB(A); K
pA
= 3 dB
Sound power level
(L
WA
) .................. 102 dB(A); K
WA
= 3 dB
Vibration (a
h
) ...... 11.4 m/s
2
; K= 1.5 m/s
2
The specified total vibration values and the
stated noise emission values have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specified total vibration values and the
stated specified noise emission values can
also be used for a provisional assessment
of the load.
Warning:
The vibration and noise
emissions may deviate from the
specified values during actual use
of the power tool, depending on
how the power tool is being used
and, in particular, what kind of ma-
terial is being worked on.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the op-
erating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
Symbols and icons
Symbols on the appliance:
Attention!
Summary of Contents for PEXS 270 C3
Page 3: ...1 3 9 2 3 6 5 7 8 3 10 4 9 6...
Page 92: ...92...
