Parkside PEXS 270 C3 Original Instructions Manual Download

Page: 6 / 178

PEXS 270 C3

│

■

WARNING!

►

Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.

►

Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched oﬀ and times where the power
tool is switched on but running without load).

General power tool
safety warnings

WARNING!

►

Read all safety warnings, instructions, illus-
trations and speciﬁcations provided with
this power tool.

Failure to follow all instruc-

tions listed below may result in electric shock,
ﬁre and/or serious injury.

Save all warnings and instructions for future
reference.

The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1. Work area safety

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmos-
pheres, such as in the presence of ﬂammable
liquids, gases or dust.

Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while
operating a power tool.

Distractions can cause

you to lose control.

2. Electrical safety

Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.

Unmodiﬁed plugs

and matching outlets will reduce risk of electric
shock.

Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.

There is an increased risk of elec-

tric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet
conditions.

Water entering a power tool will

increase the risk of electric shock.

Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.

Damaged or entan-

gled cords increase the risk of electric shock.

When working outdoors with an electrical
power tool always use extension cords that
are also suitable for use outdoors.

Use of a

cord suitable for outdoor use reduces the risk
of electric shock.

If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.

Use of an RCD reduces

the risk of electric shock.

3. Personal safety

Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inﬂuence of drugs, alcohol or
medication.

A moment of inattention while

operating a power tool may result in serious
personal injury.

Use personal protective equipment. Always
wear eye protection.

Protective equipment such

as a dust mask, non-skid safety shoes, hard hat
or hearing protection used for appropriate
conditions will reduce personal injuries.