51
GB/MT
General safety advice for electrical power tools
General safety advice for electrical power tools
gerous when they are used by inexperienced
people.
e)
Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device.
Many accidents have their origins
in poorly maintained electrical power tools.
f)
Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g)
Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this par-
ticular type of device. In doing this, take
into account the working conditions
and the task in hand.
The use of electrical
power tools for purposes other than those in
tended can lead to dangerous situations.
5. Use and handling of the cord-
less electrical power tool
a)
Charge a rechargeable battery unit
using only the charger recommended
by the manufacturer.
Chargers are often
designed for a particular type of rechargeable
battery unit. There is the danger of fire if other
types of rechargeable battery units are used.
b)
Only the rechargeable battery units
supplied are to be used with an elec-
trical power tool.
The use of other recharge
able battery units may lead to the danger of
injury or fire.
c)
When they are not being used, store
rechargeable battery units away from
paperclips, coins, keys. nails, screws
or other small metal objects that could
cause the contacts to be bridged.
Short
circuiting the contacts of a rechargeable battery
unit may result in heat damage or fire.
d)
Fluids may leak out of rechargeable
battery units if they are misused. If this
happens, avoid contact with the fluid.
If contact occurs, flush the affected area
with water. Seek additional medical
help if any of the fluid gets into your
eyes.
Escaping battery fluid may cause skin
irritation or burns.
CAUTION! DANGER OF EXPLOSION!
The batteries must never be recharged!
6. Service
a)
Have your device repaired at the ser-
vice centre or by qualified specialist
personnel using original manufacturer
parts only.
This will ensure that your device
remains safe to use.
Safety advice for all uses
General safety advice for grinding,
sanding (with sandpaper), wire brushing,
polishing and disc-cutting:
a)
This electrical power tool is intended
for use as a grinding, sanding, wire-
brushing, and disc-cutting machine.
Observe all the safety advice, instruc-
tions, information in figures and all
other information you received with
this device.
If you do not observe the follow-
ing advice it could lead to electric shock, fire
and / or serious injury.
b) Normative statement / advice for this tool is not
applicable.
c)
Do not use any accessory not specifi-
cally intended by the manufacturer
for this electrical power tool.
Although
an accessory may fit on your electrical power
tool, this does not on its own guarantee that it
can be safely used.
d)
The maximum permitted speed of an
attachment must be at least as high as
the maximum speed indicated for the
electrical power tool.
An accessory rotating
Summary of Contents for PFBS 9.6 A1
Page 3: ...6 4 8 3 7 D E F G H 18 4a 3a 1 2 5 A 11 9 10 C B 16 14 15 19 22 20 21 12 23 13 18 17...
Page 4: ......
Page 18: ...18...
Page 60: ...60...
