Parkside PFMR 1400 D3, Original Instructions Manual

PFMR 1400 D3

GB

│

IE

│

NI

│

 5

■

Residual risks

Even if you operate this power tool properly, 
there will still be residual risks. The following 
risks can occur in relation to the power tool’s 
design and structure:

■

Lung damage, if no suitable breathing protec-
tion is worn .

■

Hearing damage, if no suitable hearing protec-
tion is worn .

■

Damage to health caused by vibrations if the 
appliance is used for extended periods or is  
not properly used and maintained .

■

Crushing injuries, if you come into contact with 
rotating parts .

■

Risk of electric shock! Hold the appliance by the 
insulated handles when you are carrying out 
work during which the deployed tool may come 
into contact with concealed power cables or its 
own power cable . Contact with a live cable can 
also make metal parts of the appliance live and 
could result in an electric shock .

WARNING!

►

The power tool creates an electromagnetic 
field during operation . This field can, in 
certain circumstances, impair active or pas-
sive medical implants . To reduce the risk of 
fatal injuries, we recommend that people with 
medical implants consult their doctor and the 
manufacturer of the medical implant before 
operating this machine .

Before use

♦

Always remove the mains plug from the wall 
socket before making any settings on the  
appliance .

Fitting the universal stirrer (see fig . A)

♦

Screw the mixing spiral 

7a

 firmly onto the shaft 

7b

 .

♦

Afterwards, screw the universal stirrer   into 
the agitator shaft with M-14 internal thread   .

♦

To do this, hold the agitator shaft   firmly with 
an assembly spanner   . 

♦

Now tighten the universal stirrer   with the 
second assembly spanner   fest .

Removing the universal stirrer

♦

Proceed in reverse order to remove the universal 
stirrer   .

Fitting the stand/hanger

♦

Fit the stand/hanger   to the handle   using 
the four supplied Phillips-head screws (see fig . C) .

Using the stand/hanger

♦

Use the stand/hanger   to hang up the appli-
ance or stand it on the floor . In this way, you  
can protect it from soiling .