18
GB
• Do not operate the pressure washer
when other people are in the immedi-
ate vicinity, other than they are also
wearing protective clothes.
• Do not start the high-pressure wash un-
til the patio cleaner rests on the surface
you are cleaning.
• Take appropriate measures to keep chil-
dren away from the equipment whilst it
is running.
• Dispose of the packaging material cor-
rectly.
• Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• Store the equipment in a dry place and
out of reach of children.
• Children should be supervised to en-
sure that they do not play with the ap-
pliance.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the ap-
proval of the manufacturer.
• Protect the patio cleaner from frost
• Use only original accessories and do
not carry out conversion work on the
equipment.
Fitting
• Screw the connection pipe (2) into the
pivoting connector (3).
• To extend your reach, snap on and
turn the bayonet mount of the pipe ex-
tension (1) to the connection pipe (2).
• To connect to the pressure washer,
snap the bayonet mount into the pres-
sure washer’s jet gun.
Start-up
Take heed of the backstroke gen-
erated by the jet of water. Stand
firmly and hold the jet gun tightly.
You may otherwise injure yourself
or others.
• Do not release water from the pressure
washer until the patio cleaner rests on
the surface you are cleaning.
• Always hold the patio cleaner by the
handle (5) when washing down walls.
• Avoid the patio cleaner going over
free corners.
• The patio cleaner is not designed for
scouring out or scrubbing.
Cleaning and
Maintenance
Cleaning
Always keep the washer clean. Do
not use any detergents or solvents.
• Only clean the pressure washer with a
soft brush or a slightly moist cloth.
Maintenance
The patio cleaner is maintenance-free.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
