PFS 450 A1
■
42
│
GB
│
MT
Setting up
Assembly/disassembly
♦
Move the ▸ mark on the spray unit to the
mark on the motor unit . Now, turn the spray
unit until the ▸ mark on the spray unit
locks into the
mark on the motor unit
♦
Unlock the lock
5a
. Turn the ▸ mark on the
spray unit to the mark on the motor
unit to separate the two units.
Choosing/changing the nozzle
Nozzle
Use
1.5 mm nozzle
Low viscosity
1.8 mm nozzle
Water-based paints
2.2 mm nozzle
High viscosity
2.6 mm nozzle
Oil-based paints
♦
Undo the union nut completely and remove
it from the spray unit .
♦
Fit the desired nozzle onto the nozzle
head .
♦
Screw the union nut back onto the spray
unit .
Adding spray material
♦
Unscrew the paint cup from the spray
unit .
♦
To work on a horizontal object, place the riser
pipe in front, facing the nozzle head .
To work overhead, place the riser pipe in the
back, facing the motor unit .
♦
Fill the paint cup with the spray material
and screw it firmly onto the spray unit .
Switching the appliance on/off
Working methods
♦
Hold the spray gun at a constant distance from
the object. The ideal spraying distance is
approx. 15 cm.
♦
Work out the best settings by carrying out a test.
♦
Do not switch the appliance on/off over the
spray surface. Rather, start/end the spraying
process approx. 10 cm from the spray surface.
Switching on
♦
Insert the plug into a mains power socket.
♦
To switch the appliance on, pull the trigger
and keep it pulled.
Switching off
♦
To stop spraying, simply release the trigger .
♦
When you are finished working, disconnect the
plug from the mains power supply.
Selecting a spray profile
Setting the spray volume
♦
Turn the spray volume adjusting wheel to
the desired position:
(–) = minimum spray volume
(+) = maximum spray volume
NOTE
►
We recommend starting at the minimum
setting.
Selecting a jet type
♦
Undo the union nut .
♦
Turn the protruding parts of the nozzle head
so that they point to the desired symbol on the
spray unit .
The appliance has the following settings:
▯ round jet
vertical flat jet
horizontal flat jet
♦
Re-tighten the union nut .
Summary of Contents for PFS 450 A1
