11
GB
General safety advice for electrical power tools
for use outdoors.
The use of an extension cable suitable for
outdoor use reduces the risk of electric shock.
f)
Use a residual current device (RCD) for protection if
operating the electrical power tool in a moist environ-
ment is unavoidable.
The use of an RCD reduces the risk of
electric shock.
3. Personal safety
a)
Remain alert at all times, watch what you are doing
and always proceed with caution. Do not use the de-
vice if you are tired or under the influence of drugs,
alcohol or medication.
One moment of carelessness when using
the device can lead to serious injury.
b)
Wear personal protective equipment and
always wear safety glasses.
The wearing of per-
sonal protective equipment such as dust masks, non-slip
safety shoes, safety helmets or ear protectors, appropriate to the
type of electrical power tool used and work undertaken, reduces
the risk of injury.
c)
Avoid unintentional operation of the device. Check
that the electrical power tool is switched off before you
connect it to the mains, pick it up or carry it.
Accidents
can happen if you carry the device with your finger on the ON /
OFF switch or with the device switched on.
d)
Remove any setting tools or spanners before you
switch the device on.
A tool or spanner left attached to a
rotating part of a device can lead to injury.
e)
Avoid placing your body in an unnatural position.
Keep proper footing and balance at all times.
By doing
66133_Mini-Graviergerät_content_LB4.indd 11
03.06.11 16:59
