Parkside PHKSA 12 A2, Translation Of The Original Instructions

PHKSA 12 A2

■ 

10 

│

GB

│

IE

│

NI

Battery charge level

♦

The status will be shown on the battery display 
LED   as follows:
RED/ORANGE/GREEN = maximum charge 
RED/ORANGE = medium charge 
RED = low charge – charge the battery

Overload warning

♦

If the appliance is in danger of overloading, 
the overload warning   lights up briefly . The 

appliance switches off . 

Setting the cutting angle

You can select the cutting angle using the cutting 
angle scale   .

■

Undo the wing screw   of the cutting angle 
preselector . Set the desired angle on the cutting 
angle scale   using the top edge of the raised 
black metal part (see fig . C) . Retighten the wing 
screw   . 
The left recess in the base plate is for a cutting 
angle of 45° . (

Fig. B)

0

Fig. C: Setting the cutting angle to 45 degrees

Setting the cutting depth

NOTE

►

Select a cutting depth of approx . 3 mm more 
than the thickness of the material . This ensures 
that you achieve a clean cut .

♦

Undo the locking screw   and set the desired 
cutting depth on the cutting depth scale   
using the reference marks (see arrow in fig . D) . 
Retighten the locking screw   .

Fig. D: Setting the cutting depth

Working with the circular saw

1 .   Switch on the appliance – as described in 

“Switching on and off” – and then place it 

with the front edge of the base plate   on the 

material .

2 .   Align the machine using the rip fence   or by 

using a marked line .

Maintenance and cleaning

WARNING! RISK OF INJURY! Always 
switch the appliance off and remove 
the battery before carrying out any 
work on the appliance.

The cordless hand-held circular saw is mainte-
nance-free .

■

The appliance must always be kept clean, dry 
and free from oil or grease .

■

Never allow liquids to get into the appliance .

■

Use a soft, dry cloth to clean the housing . 
Never use petrol, solvents or cleansers which 
can damage plastic .

■

The blade guard must always move freely and 
close automatically . Therefore, keep the area 
around the blade guard clean at all times . Re-
move dust and chips by blowing them out with 
compressed air or with a brush .

■

If a lithium-ion battery is to be stored for an 
extended period, the charge level should be 
checked regularly . The optimum charge level is 
between 50% and 80% . The optimum storage 
environment is cool and dry .