21
PHLG 2000 C2
GB
■
Always remove the plug from the
power socket during work breaks,
when adjusting the appliance (e.g.
changing nozzles) and when it is
no longer in use.
■
Keep the nozzle at a distance from
the workpiece or the area being
processed. A build-up of hot air can
result in damage to the appliance.
■
Pay close attention to the area being
worked and also the surrounding
area. The heat can reach combust-
ible parts outside your field of vision.
■
The appliance must always be kept
clean, dry and free from oil or
grease.
■
Never use the appliance for pur-
poses other than the ones for which
it was designed.
Operation
Operation
CAUTION!
►
Do not cover the ventilation slots during use.
CAUTION!
RISK OF BURNS!
►
Do not touch the hot nozzle.
Switching the appliance on:
■
Move the ON/OFF switch into the "I" or "II"
position.
Switching the appliance off:
■
Move the ON/OFF switch to the "0" posi-
tion.
Setting airflow and temperature:
You can use the temperature and air flow control
to select between two different blower levels.
Depending on the application, you can select the
most suitable airflow and temperature:
Level I
approx.
300 l/min.
approx.
350°C
Level II
approx.
500 l/min.
approx.
550°C
Use as a free-standing appliance/cooling
(see fig. A):
■
Place the appliance upright on a level surface
–
to have both hands free to work.
–
or to allow the appliance to cool down.
Summary of Contents for PHLG 2000 C2
Page 3: ...A...
