background image

12

GB

IE

NI

or damaged parts. Check the appli-

ance for signiicant damage or defects 

if it is dropped.

Service 

Have your power tool serviced

by a qualiied repair person us

-

ing only identical replacement
parts.

 This will ensure that the safety

of the power tool is maintained.

Hedge trimmer safety 
warnings

Preparation

THIS HEDGE TRIMMER CAN CAUSE
SERIOUS INJURIES! Read the instruc-
tions carefully regarding the correct
handling, preparation and mainte-
nance, for starting and stopping the
hedge trimmer. Familiarise with all con-
trols and the proper use of the hedge
trimmer.

Caution! Notice overhead power lines.

Use of the hedge trimmer should be
avoided when people, especially child-
ren, are nearby.

If the cutting unit contacts a foreign
body or if the operating noises increa-
se or the hedge trimmer vibrates with
unusually high force, turn off the motor
and let the hedge trimmer come to a
standstill. Pull the mains plug and take
the following measures:

- check for damages;
- check for loose parts and fasten all

loose parts;

- replace damaged parts with equiva-

lent parts or have them repaired.

Operation

Switch the appliance off and remove
the mains plug, before:

- cleaning or removing a blockage;
- inspection, servicing or work on the

hedge trimmer;

- adjusting the working position of the

cutting unit;

- leaving the hedge trimmer unattended.

Always ensure that the hedge trimmer
is properly placed in one of the indica-
ted working positions before the motor
is started.

Do not use the hedge trimmer with a de-
fective or strongly worn-out cutting unit.

• To avoid the risk of ire, ensure that the

motor is free from deposits and leaves.

Always ensure that all handles and safety
devices are mounted when you use the
hedge trimmer. Never try to use an incom-
plete hedge trimmer or a hedge trimmer

with impermissible modiications.

Always use both hands when the
hedge trimmer is equipped with two
handles.

Always familiarise with your surroun-
dings and pay attention to potential
dangers that you cannot hear because
of the noise the hedge trimmer makes.

Keep cable away from cutting area.
During operation the cable may be
hidden in shrubs and can be acciden-
tally cut by the blade.

Keep all parts of the body away from
the cutter blade. Do not remove cut
material or hold material to be cut
when blades are moving. Make sure
the switch is off when clearing jammed
material. A moment of inattention
while operating the hedge trimmer
may result in serious personal injury.

Children must never use the hedge
trimmer.

Maintenance and storage

If the hedge trimmer is taken out of
operation for purposes of maintenance,

Summary of Contents for PHSHE 900 A1

























































Reviews: