background image

13

NI

IE

GB

inspection or storage, turn off the motor, 
pull the mains plug and make sure that 
all rotating parts have come to a stand-
still, and let the machine cool down 
before you check or adjust it, etc.

•  Carry the hedge trimmer by the handle 

with the cutter blade stopped. When 
transporting or storing the hedge trim-

mer always it the cutting device cover. 

Proper handling of the hedge trimmer 
will reduce possible personal injury 
from the cutter blades. 

Safety information for 
chainsaws

•  When in operation, keep all 

body parts away from the saw 
chain. Before you start the saw, 
ensure that the saw chain is not 
touching anything. 

When using a 

chainsaw, losing concentration for just 
a moment can lead to clothing or body 
parts being caught up in the saw chain.

•  Always hold the chainsaw with 

your right hand on the rear 
handle and left hand on the 
front handle. 

Holding the chainsaw 

the other way around increases the risk 
of injuries and is not permitted.

•  Wear protective goggles and 

hearing protection. Further pro-
tective equipment for the head, 
hands, legs and feet is required. 

Appropriate protective clothing redu-

ces the risk of injury from lying chip 

material and accidental contact with 
the saw chain.

•  Do not use the chainsaw to 

work on trees. 

Operating a chain-

saw on a tree poses the risk of injury.

•  Ensure you are standing irmly 

and only use the chainsaw if 
the ground beneath you is solid, 

secure and even. 

Slippery ground 

or unstable surfaces such as on a lad-
der can lead to loss of balance or loss 
of control over the chainsaw.

•  If working on a branch under 

tension, be aware that it will 
spring back.

 Once the tension in 

the wood ibres has been released, the 

branch may hit the user and/or control 
over the chainsaw may be lost.

•  Be particularly careful when 

cutting brushwood and young 
trees.

 The thin material may become 

caught in the saw chain and hit you or 
cause you to lose balance.

•  Carry the chainsaw by the front 

handle when it is switched off 
with the saw chain pointing 
away from your body. Always 
place the protective cover onto 
the chainsaw when transport-
ing or storing it. 

Careful handling 

of the chainsaw reduces the probabili-
ty of accidentally coming into contact 
with the running saw chain.

•  Observe the instructions for lu-

brication, chain tensioning and 
replacing accessories. 

An impro-

perly tensioned or lubricated chain 
may rip apart or increase the risk of 
kickback.

•  Keep handles dry, clean and 

free from oil and grease. 

Greasy, 

oily handles are slippery and lead to 
loss of control.

•  Only saw wood. Do not use the 

chainsaw for unintended ap-
plications - example: do not use 
the chainsaw to saw through 
plastic, masonry or construction 
materials not made from wood. 

Use of the chainsaw for unintended 
applications can lead to hazardous 
situations.

Summary of Contents for PHSHE 900 A1

























































Reviews: