Parkside PISG 80 A1, Original Instructions Manual

31 

GB

Introduction / Safety  information

List of pictograms used

Inverter welder PISG 80 A1

 Introduction

Congratulations! You have 
chosen a high-quality unit from 
our company. Familiarise your-

self with the product before using it for the first time. 
In addition, please carefully refer to the instructions 
for use and the safety instructions below. Initial op-
eration of this tool must be performed by trained 
personnel.

KEEP OUT OF THE REACH OF CHILDREN!

Intended use

This welding tool is suitable for welding metals such 
as carbon steel, alloy steel, other stainless steels, 
copper, aluminium, titanium, etc. The product has a 
control lamp, a thermal protection indicator, and a 
cooling fan. It further has a strap to safely lift and 
move the product. Improper product handling can 
be dangerous to persons, animals and objects. Only 
use the product as described and for its indicated 
purpose. Keep these instructions in a safe place. 
When passing this product on to others, please also 
include all the documents. Any use other than the 
intended is prohibited and potentially dangerous. 
Damages resulting from noncompliance or misuse 
are not covered by the warranty and are not included 
in the manufacturer‘s liability. 

Note: 

Classification per EMV stan dard: Class A 

per IEC 60974-10

Warning:

 Equipment categorised Class A are in-

tended for industrial use. When used in other areas, 
electromagnetic tolerance may not be warranted 
or failures may occur.

Parts Description

1

  Carrying strap

2

  Overheating control lamp

3

  Control knob

4

  Earthing lug

5

  Electrode holder

6

  Combination wire brush with chipping hammer

7

  Welding shield

8

 Grip

9

  ON / OFF  switch

10

  Mains lead

Technical Data

Mains  connection: 

230 V∼  50 Hz

Max. welding current 
and the respective 
conventional  load  voltage:   10 A / 20.4 V–80 A /  

23.2 V

Rated value of the 
Mains voltage: 

U

1

:  230 V

Highest rated value 
of the mains current: 

I

1max

:  14.3 A

Maximum effective 
input current: 

I

1eff

:  11 A

Rated value of the 
no-load voltage: 

U

0

:  68 V

Protection class: 

IP21S

Scope of delivery

1  Inverter welder PISG 80 A1
1  Welding shield
2  Welding cables
1  Combination wire brush with chipping hammer
1  Carrying strap
1  Instructions for use

 Safety  instructions

Please carefully read the instructions for use and 
follow the specified notices. Familiarise yourself with 
the tool, its proper use and the safety notices using 
these instructions for use. The nameplate contains 
all the technical data for this welding tool, please 
learn about the technical facts of this tool.

270751_Inverter Schweissgeraet PISG 80 A1_content_FR.indd   31

27.01.16   15:00