GB
6
Technical Data
4in1 Cordless combination tool ... PKGA 14.4 A1
Motor voltage ........................... 14,4 V
Idling speed (n
0
) ....................21000 min
-1
Sound pressure level (L
PA
) ........ 86,7 dB(A),
K= 3 dB
Sound power level (L
wA
) ........... 97,7 dB(A)
K= 3 dB
Motor unit with
drill attachment ..............PKGA1
Idling speed (n
0
) ........ 0-400/0-1350 min
-1
Torque
.................................max. 25 Nm
Spread drill chuck ................... 1.0-10 mm
Drill diameter
for wood .......................... max. 25 mm
for steel ............................. max. 8 mm
Weight (without charger) ................1,5 kg
Vibration (a
h
)
drilling in metal ....1,615 m/s
2
, K= 1,5 m/s
2
drilling in wood ...1,475 m/s
2
, K= 1,5 m/s
2
Motor unit with
multisander attachment ..PKGA2
Oscillation rate (n
0
) ..............0-9000 min
-1
Sanding sheet size
.......138 x 97 mm
Weight (without charger) ................1,3 kg
Vibration (a
h
) ......4,383 m/s
2
, K= 1,5 m/s
2
Motor unit with
sabre saw attachment ....PKGA3
Stroke rate (n
0
) .....................0-3200 min
-1
Stroke length ............................... 22 mm
Weight (without charger) ................1,7 kg
Vibration (a
h
)
Sawing boards ................. 11,926 m/s
2
Sawing wood beams ........ 12,392 m/s
2
K= 1,5 m/s
2
Motor unit with
multifunction tool ...........PKGA4
Oscillation rate (n
0
) ............0-20000 min
-1
Oscillation angle ..............................3,0°
Weight (without charger) ................1,3 kg
Battery (Li-Ion) .............................. PAP14.4
Nominal voltage ....................... 14,4 V
Capacity ...................................... 1,5 Ah
Charging time ...................... approx. 1 h
Recharger .......................... JLH-H150-14.4
Nominal consumption .....................40 W
Voltage input .........100-240 V~, 50-60 Hz
Voltage output ............ 14,4 V 1500 mA
Protection class ................................. II
Protection category .......................... IPX0
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further develop-
ment without notice. All dimensions, referenc-
es and information in this instruction manual
are therefore not guaranteed. Legal claims
made on the basis of the instruction manual
can therefore not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure as-
sessment.
Warning:
The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
Summary of Contents for PKGA 14.4 A1
