60
GB
MT
Torque adjustment
You can preselect the maximum torque.
The torque settings are labelled 1 - 19 +
1. Wait for the appliance to come to a
standstill.
2. Turn the torque adjusting ring (2) to
select the desired torque:
Screws:
Steps 1 - 19
Drilling:
Step
3. Start with a lower torque step and
increase as required.
The direction change may only be
actuated when the appliance is at a
standstill!
The necessary torque is dependent
on:
- the type and hardness of the ma-
terial to be treated;
- the type and length of the screws
used.
Motor unit with multi-
sander attachment PKGA2
Secure the appliance against
switching on (see “Switch-
ing on/off”). If the appliance
is switched on accidentally,
there is a danger of injury.
Attaching/removing sanding
sheet
The sanding plate (
22) is itted with
Velcro for rapid attachment of the sanding
sheet.
Attaching sanding sheet
1. Press the sanding sheet (24) evenly
onto the sanding plate (22). Ensure
that the holes in the sanding sheet
are placed above the openings in the
sanding plate.
Removing sanding sheet
2. Simply pull the sanding sheet (24) off
the sanding plate (22).
Connecting dust extraction
You can reduce dust production during
sanding by attaching a dust extraction sys-
tem.
1. Push the adaptor (25) into the opening
on the multi-sander attachment (23) as
far as the stop.
2. Connect a dust extractor suction hose
to the adaptor (25).
If necessary, you can connect the suc-
tion hose of a vacuum cleaner without
reducer (25a) to the adapter (25).
Motor unit with sabre
saw attachment PKGA3
Installing/changing the blade
Secure the appliance against
switching on (see “Switch-
ing on/off”). If the appliance
is switched on accidentally,
there is a danger of injury.
Wear gloves when handling the
sawblade. In this way, you avoid
injury from cuts.
Caution, risk of Injury!
- Do not use any blunt or bent
blades or blades which are
damaged in any other way.
- Always insert a suitable saw-
blade.
Summary of Contents for PKGA 20-Li A1
