5
GB
IE
NI
General description
Scope of delivery
• Manual
• Shredder unit
• Chassis
• Collector box
• Two wheels
• Two wheel covers
• Wheel shaft kit (1pc shaft + 4pcs
w 2pcs cotter pins)
• Four self-tapping screws 6x25 mm
• Two support foot with two self-tapping
screws 5x45mm
• Allen key
• Pusher
See the front fold-out page for
illustrations.
Overview
1 Wheel cover
2 Wheel
3 Support foot
4 Safety switch
5 Adjustor screw
6 Power cable with plug
7 Handle
8 Funnel feeder
9 Function switch
10 ON switch
11 OFF switch
12 Overload protection switch
13 Power-On indicator
14 Pusher
15 Shredder unit
16 Chassis
17 Collector box
18 Inner washer (not visible)
19 Outer washer (not visible)
20 Cotter pin (not visible)
21 Wheel shaft
22 Blade cover screw
23 Blade cover
24 Cylinder blade
25 Pressure plate
Functional description
The silent shredder is equipped with a
powerful motor, overload protection,
and restart prevention for additional
safety. A blade cylinder system is used
for cutting, which works extremely quietly
and automatically draws in the shredding
material. A 60L transparent collector box is
convenient for handle the debris and check
the capacity. The sturdy chassis ensures a
stable standing position with good mobility.
Refer to the following descriptions for a
functional description of the controls.
Technical data
Electric Garden Shredder.PLH 2800 B2
Nominal power intake........2800 W (P40)*
Nominal voltage ........230-240 V ~, 50 Hz
Degree of protection ......................... IPX4
Branch thickness .................Max 45 mm**
Collector box content ..............Approx 60 l
Weight ...........................28,5 kg(approx.)
Sound pressure level (L
pA
)
......................... 63,4 dB(A); K
pA
= 3 dB(A)
Sound power level
Measured (L
WA
)
.........................83,4 dB(A); K
wA
= 3 dB(A)
Emission sound pressure level
...................................83,4 dB(A) K=3 dB
Guaranteed ................................92 dB(A)
Wheel size ..............................Ø 200 mm
* Continuous-operation periodic duty (20 s
on - 30 s idle)
** The max. branch thickness that can be
chaffed is dependent on the type of
wood and the quality of the goods being
cut.
For hard wood (e.g. oak/beech
branches), the max. branch thickness
that can be chaffed is less than for soft
wood (e.g. pine/spruce wood). For
dry or knotted wood, the cutting
thickness may also be less.
